Question about Food Processors

Open Question

What cup pressures using 40grains 4895 power with 250gr jacket bullet in 35winchester case

Posted by THOMAS BERTOSA on

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Magic Bullet will not start or run. it does not twist in the base. How can I fix that?


Sounds like the white plastic sliders that turn the motor on and off may be stuck. The sliders engage the 3 tabs on the mixer cup which the push down and turn the motor on. Probably have some leakage from the mixing cup gumming the white sliders up. Unplug the mixer from power and use a cloth or sponge fairly wet with some hot water to try and loosen up the stuff under the sliders. Then spritz the sliders with some WD-40 which will displace the water. Dry it off good with a paper towel, let it dry/drain well upside down on a paper towel before you plug it back in. Good luck.

Dec 13, 2014 | As Seen On TV Magic Bullet Food Processor

1 Answer

Magic bullet base is full of particles


Yes its easy to take the Magic Bullet apart.

1. First pry out the 4 black rubber feet on the base with small screwdriver and unscrew the 4 cross head screws revealed below.

2. Remove this black base to reveal the inner black base Unscrew the cable clamp - 2 screws and the 3 screws that retain the remaining black base to the body of the bullet - slide it off over the power cable.

3. Turn the bullet the proper way up and pry out the 3 white rubber bumpers with a screw driver blade that are set inside for the cup to rest on - each is located with two rubber pins. Once all 3 are removed you will reveal 3 more cross head screws - these countersunk - remove all 3 and then the internal motor will be free to lift out through the top of the Bullet casing.

4. Its possible to slip out the 3 white plastic sliders - taking care to note how they seat each on a small spring to cleanup both the slides and the sliders.

To re assemble step by step in reverse - noting to align the motor cable with the cutouts on the bullet base.

Sep 18, 2012 | As Seen On TV Magic Bullet Food Processor

1 Answer

Can you replace a melted cord


I posted the reply pasted below on how to take the Bullet apart - really not difficult once you know where the hidden screws are apart. Once apart it easy to see where the power cable terminates and should be easily possible to connect in a new cable in its place.

Yes its easy to take the Magic Bullet apart.

1. First pry out the 4 black rubber feet on the base with small screwdriver and unscrew the 4 cross head screws revealed below.

2. Remove this black base to reveal the inner black base Unscrew the cable clamp - 2 screws and the 3 screws that retain the remaining black base to the body of the bullet - slide it off over the power cable.

3. Turn the bullet the proper way up and pry out the 3 white rubber bumpers with a screw driver blade that are set inside for the cup to rest on - each is located with two rubber pins. Once all 3 are removed you will reveal 3 more cross head screws - these countersunk - remove all 3 and then the internal motor will be free to lift out through the top of the Bullet casing.

4. Its possible to slip out the 3 white plastic sliders - taking care to note how they seat each on a small spring to cleanup both the slides and the sliders.

To re assemble step by step in reverse - noting to align the motor cable with the cutouts on the bullet base.

Aug 22, 2012 | As Seen On TV Magic Bullet Food Processor

1 Answer

I can not get the magic bullet container to lock into the motor, so the motor will not run


You need to buy a new cup or a refurbished one. Search google with keywords "amazon magic bullet cup".

May 09, 2010 | As Seen On TV Magic Bullet Food Processor

1 Answer

Blade is broken can i get new blade


On the website they are offering a package where you can get a new blade, but it comes with a bunch of other things. The website is: http://www.buythebullet.com/
and this is the package they offer:
Deluxe Upgrade Kit Upgrade your Magic Bullet! You can save even more time and trouble in the kitchen with the Magic Bullet Deluxe package, which includes 2 additional Tall Bullet Cups and 1 additional Short Bullet Cup, plus 3 more Stay-Fresh Re-sealable Lids.
Using the Magic Bullet in our own homes we've found these extra Bullet Cups and Lids come in very handy when the others are being used to store leftovers in the fridge. Plus, you also get 1 extra Cross Blade. And since this is the blade you'll use the most, it's nice to have an extra one around when the other is in the dishwasher. If you have a family at home, the Magic Bullet Deluxe is a must! Upgrade your Magic Bullet today for just one payment of $29.97 (plus $6.99 shipping and handling).


Nov 26, 2009 | As Seen On TV Magic Bullet Food Processor

2 Answers

Do you know where I could get a manual on Magic Bullet MB1001?


If you go on the website, http://www.buythebullet.com/ , they don't have a manual, but they do have recipes which not only tell you the ingredients to use, but how to use the machine to make them.
All the pieces except for the base are dishwasher safe and all the cups and lids (not the blades) are microwave safe.
Hope this helps!

Aug 30, 2009 | As Seen On TV Magic Bullet Food Processor

Not finding what you are looking for?
Food Processors Logo

Related Topics:

189 people viewed this question

Ask a Question

Usually answered in minutes!

Top Food Processors Experts

Moderator Canada
Moderator Canada

Level 3 Expert

35917 Answers

ray gallant

Level 3 Expert

71004 Answers

Tom Chichester

Level 3 Expert

61164 Answers

Are you a Food Processor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...