Question about Lands Phones

1 Answer

Meridian M7208 phone

Used feature + 4 to forward calls to an outside number and now the incomming lines (2) do not work.

Posted by Angelo81 on

Ad

1 Answer

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 201 Answers

You can unplug the phone system to reset it, plug it back in and then turn off that forward rule.

Posted on Nov 25, 2007

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cancel call forward


Feature # 4

F4 forward to:
F#4 cancel forward

May 02, 2014 | Nortel Meridian M7208 Corded Phone

1 Answer

My M7310 won't forward a call to the next open line but gives a busy signal


Hard to answer because your problem description does not match the part.
Nortel Meridian M7208 Corded Phone is a digital phone which works off a phone system.Also note that the carrier controls the rollover, not the phone or its system.

Once you have more/proper details maybe you can be helped.

Dec 14, 2012 | Nortel Meridian M7208 Corded Phone

1 Answer

Nortel Meridian M7208 page not working...


Press Feature * 3
press the 5th line key you want to use for paging
enter the page-all code (feature 601-603 as you wish)

Aug 20, 2017 | Nortel Meridian M7208 Corded Phone

2 Answers

Panasonic KX-T7730, we have a 824 phone system and cordless handsets (kx-tg1711) we cannot make outgoing calls on these handests but can take incoming calls and can transfer calls. how do we programme


  • Locate the program and auto-store button on your telephone. You will be using these to customize many of the features on your KX-T7730. The program button is used to enter or exit programming.

  • 2

    Program your outgoing line preference, i.e., the line you prefer to seize when you go off hook. Press "Program" "1" "1" "store" for no line. Press "Program" "1" "2" "Store" for an idle outside line. Press "Program" "1" "3" "Outside Line Number" "Store" for an assigned outside line. The outside line number will be a single or double-digit number that is set through your phone system.

  • 3

    Program your incoming line preference, i.e., the line you prefer to answer when you go off hook. Press "Program" "2" "1 "Store" for no line. Press "Program "2" "2" "Store" for ringing line. Press "Program" "3" "Outside Line Number" "Store" for an assigned outside line.

  • 4

    Program your flexible CO buttons. These are the inner row of 12 lighted buttons. Your outside lines need to be programmed to these--you can choose any of these 12 buttons in any order. Press "Program" "CO Button" "0" "Outside Line Number" "Store." The outside line number will be a single or double-digit number that is set through your phone system.

  • 5

    Program any other unused flexible CO buttons for an extension number or any frequently dialed phone number. Press "Program" "CO button" "1" "Extension Number" "Store" or "Program" "CO Button" "2" "9 + Phone Number" "Store". A "9" must be entered at the beginning of a phone number to tell your phone system to seize an outside line before dialing, e.g., "9-1-212-555-1234."

  • 6

    Locate the programmable feature buttons (the row of 12 solid buttons on the right). These buttons are basically one-touch buttons that can be set for extension numbers or phone numbers. Press "Program" "(PF) Button" "Extension Number" "Store" or "Program" "(PF) Button" "9 + Phone Number" "Store." Remember to press "Program" again to exit programming.

  • 7

    Locate your "FWD/DND" button. This button is used for setting "Call Forward" or "Do Not Disturb" on your telephone. To set call forwarding, go "off-hook" either by lifting the receiver or pressing speakerphone. Make sure you go to intercom and not an outside line. To forward all calls, go off-hook, press "FWD/DND" "1" "extension number" (the extension number that you wish to forward all your calls to) "#". After you hear a confirmation tone, place the receiver on-hook. The steps to set call forwarding for busy/no answer are the same as above, except you will press "2" in place of "1". To cancel call forwarding, press "0" in place of "1".

  • 8

    Program "Do Not Disturb," which stops your phone from ringing--any callers will just hear a DND tone. To program, go off-hook, press "Program" "4" "#" on-hook, to set. Press "0" instead of "4" to cancel.

  • 9

    Locate the message button--this works in coordination with your message light at the top right of your telephone. If the light is lit, press "message" to hear a message left to you either by another extension or a voice mail system. The message button can only be programmed as a message or one-touch button. To program as a message, press "Program" "Message" "3" "Store." To program as a one-touch, press "Program" "Message" "1" "Extension Number" or "Program" "Message: "2" "9 + phone number."

  • 10

    Return your KX-T7730 to its default settings by pressing "Program" "#" "*" "Store."



  • Read more: How to Program a Panasonic KX T7730 ' eHow.com http://www.ehow.com/how_7159736_program-panasonic-kx-t7730.html#ixzz1eYPzbevZ

    Nov 23, 2011 | Panasonic KX-T7730 Corded Phone

    1 Answer

    Meridian M7208 Phone-Only 2 lines are working


    Sounds like it might be a telco problem. Do lines 3 ,4 work on the other phones?
    Switch lines 1 and 3 to see if the problem changes.

    Apr 22, 2009 | Nortel Meridian M7208 Corded Phone

    1 Answer

    SCREEN NOT DISPLAYING NUMBERS


    If you haven't already tried it, unplug the phone, press a couple of buttons, then plug it back in so it resets. If the boxes still appear, try adjusting the display contrast. Press Feature-*-7 to get to contrast setting and then press 6 or 7 to set mid-range contrast.

    Mar 30, 2009 | Nortel Meridian M7208 Corded Phone

    1 Answer

    How do I retrieve recent incoming calls


    If you have call log set up you can access the log log by pressing feature 812. To program that feature as a one touch button press feature *3, press the button you what to be call log and enter feature 812

    Mar 27, 2009 | Nortel Meridian M7208 Corded Phone

    1 Answer

    My phone, a meridian M7208, does not ring incoming calls


    following a power failure, the only phone that rings is the one in reception. light still flashes but no ringing from any other phones

    Feb 16, 2009 | Nortel Meridian M7208 Corded Phone

    1 Answer

    Forwarding calls between extensions


    Yes, press Feature 4, then enter the extension of the line you wish to forward the ring to. You can also go into the phone configuration to forward after a set # of rings. To ring another extension at set times you will need admin access.

    Jul 02, 2008 | Nortel Meridian M7208 Corded Phone

    1 Answer

    Can I forward an incoming call to an outside line?


    External transfer to Mobile 1. Transfer 2. press 1 and external # 3. Wait for ringing 4. press feature then transfer 5. hang up

    Jun 11, 2008 | NEC Electra Elite 32D-1 Corded Phone

    Not finding what you are looking for?
    Lands Phones Logo

    Related Topics:

    646 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Lands Phones Experts

    Ekse

    Level 3 Expert

    13434 Answers

    Cindy Wells

    Level 3 Expert

    6120 Answers

    Marvin
    Marvin

    Level 3 Expert

    85239 Answers

    Are you a Lands Phone Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...