I have a bilirubin count of over 600 is this dangerous I am 65 years old

Contact Philips tomorrow morning

https://www.google.com/search?q=BiliChek%2C+a+noninvasive%2C+transcutaneous+bilirubin+measurement+system.+Service+Code%3A101d

..

How to Treat Jaundice? Jaundice Is a Condition Where Your Skin Changes to Yellow Colour. It Is Caused Because of the Excessive Production of Bilirubin Pigment. Neonatal Children Develop Jaundice Because of the Immature Liver. Read More and Find Some of the Effective Home Remedies to Treat Jaundice. For more info : https://howtocure.com/jaundice/

Here is a truck forum I think you will enjoy. Read through it because it has a lot of information. I personally could not get faster than 60mph on the freeways in Arizona because of the governor. Maybe 65 if I was behind a big semi.

not sure if this is what you are asking...Normal bilirubin levels are 0.2 to 1.2 mg/dL of blood. If chemotherapy has caused liver damage or dysfunction, you may notice a yellowing of the skin, called jaundice or icterus, when the bilirubin level reaches 3.0 mg/dL. Bleeding times - such as Prothombin time (PT) - may be prolonged if there is liver damage.

Liver Problems - Managing Side Effects - Chemocare

chemocare.com/chemotherapy/side-effects/liver-problems-liver-dysfunction.aspx..or go to this link and have a read up about it.... side effects from increased bilirubin Google Search

I have fixed this problem many times for my customers.Ninety percent of the time it is a bad high limit thermostat which means it is getting way too hot and can be dangerous.In most cases i would try to tell people how to fix the problems on their own,but since this can be dangerous i suggest a professional.my company is named Mechanical mobile services and the number is 443-791-0895.We can offer you same day service.

depends on how old it is. simple answer is yes but it can be complicated and expensive and dangerous if not done correctly plus parts only available from manufacturer and sold to dealers only

The laser mirror could be dirty, the transfer roller could need changing. Looking at the "print quality" sub menu, the toner density default setting is 3. Up it to 4 or 5. See if that makes a difference. Remove the cartridge and open the covers. Use canned air or an air compressor and blow out the printer.

Dont use it!
Old cribs are dangerous as they dont meet current safety standards.
A childs head can fit between the slats and they can choke, causing death.
I dont think you would be comfortable with this so discard it or deem it "ANTIQUE-NOT
FOR USE BY CHILD". Whatever you do, dont use it, please.

anything that has at least 18 AH (amp hours) should be fine CCA's (cold cranking amps) are what count check your old battery or, your bike's specifications

Dear friend,
ngfam at you service! happy to assist!

There is a fire danger here!
CALL SERVICE RIGHT AWAY!!!!!!!!!!!!!!!!

How old is the appliance ?
If it's 10 years old or more it's not worth sinking good money into bad !Todays appliances are so much more efficient that you save money on you electric bill!

Below I gave you a nation wide service thats very good!

We sell appliances for 65 years and I recommend this nation wide Factory repair service!

Call A&E Factory Service /They service nation wide
And are available 24/7 for making appointments!

If the appliance is 10 years old or more,it may make sense not to invest any money to fix it!

Happy to assist you,
PLEASE GIVE ME A GOOD RATING BEFORE YOU SIGN OFF!