How do i setup the scanning part? - HP Officejet 4315v All-In-One InkJet Printer

You could set up the scan and send features according to what storage function you have available. It does not have to be only smtp email. See the scan setup procedures in the online user guide and select which option would suit your setup. Scan to folder is one option. You need to provide the URL or similar link in the settings.
Contents Scan

the scan setup is on the setup CD, or you can download it from the Canon web site

the scan and complete setup is on the setup CD, or you can download it from the Canon web site

first reinstall operating system

and after it install scanner setup if scanner setup not run
then
downlode another setup and install it


problem will solve

Click this LINKfor the Scan to SMB setup guide which will walk you through the settings. If it had been working then stopped most likely just one setting has changed; the two things I would look at first is the password for the folder you are scanning to and and IP/Host Name of the computer you are scanning to.

Does your Domain require you to change your password on a regular bases? If so then the password set in the copier to access the folder on the computer may have changed and the new password needs to be set in the copier.

Also the person that setup the scanning originally may have set it to scan to the IP address of the computer you are scanning to but if the computer is setup for a dynamic IP address the IP will change from time to time and then the copier will not be able to find the computer you are scanning to. Change the IP that the copier is set to scan to, to the Host Name of the computer you are scanning to and that will no longer be an issue.

The Scan to SMB setup guide goes over these settings.

You can also call Kyocera's free help desk Monday - Friday 9 am - 6 pm EST at: 1-800-255-6482.

is your printer setup to scan to pc.need to setup email address etc.

If you go into the admin setting when using the web browser you can enter the email setting one of the options is binary, if you turn off or on depending on the setting it should stop this fault.

you should have a code book with the scanner setup barcodes in it, you need to enable code 128 by scanning the appropriate codes in the code book.

when your in the EZSCAN mode and its scanning you can skip the scans that you want by pressing ENTER when it begins on the scans you dont want..It will tell you what is scan mode is DTV,CABLE,ANALOG TV .Press ENTER as soon as it scans the unwanted scan modes then let it scan on DTV ..

I have the samne problem, hoiwever when I press the menu/setup button it says setup on the display but nothing changes on the tv, it does not have a navigation menu, any suggestions on what to do to remove the progressive scan from my screen