Code to program polaroid vcr/dvd combo and a new sharp lcd tv

New 3 digit codes for DVD/VCR, DVR/SAT, TV/VCR, TV ...

www.eliztech.com/remotes/ge-new-3digit-combo-codes.php

DVD/VCR, DVR/SAT, TV/VCR, TV/DVD, DVR/CABLE and DVR/DVD combo codes for GE/Jasco three digit universal remote controls purchased after ... 3 digit codes for GE Universal remotes purchased after August 2002 ... PANASONIC, 437.

[PDF]Manufacture Code List

https://www.att.com/support_media/images/.../set-up-code-list.pdf

AT&TDVD VCR COMBO. VCR. HTIB. REC TUN. AMPLIFIER. TV. Abex 1098. Admiral ....Panasonic 1003, 1010, 1049, 1053, 1096, 1123, 1152, 1231, 1289,. 1292 ...

Remote Control Program Codes - FTC - Farmerstel.com

Hello
Setup codes for Emerson Tv with One For All URC-4021 remote control are:

0154, 0236, 0463, 0180, 0178,
0171, 0623

The One For All 4 Device Universal Remote Control is preprogrammed at

the factory to operate an RCA TV, a Toshiba DVD player, a Motorola cable

box, and an RCA VCR.To control devices other than the default brands,perform
the following steps; otherwise skip this section:

[1] Turn on a desired device (e.g.,VCR or DVD player) and, if
applicable, insert media (e.g., cassette or disc).

NOTE: Please read steps 2 through 4 completely before proceeding.

Highlight or write down the codes and device you wish to program
before starting step 2.

[2] On the remote control,press a device key once (i.e., VCR/PVR,
DVD, CBL/SAT,or TV).

NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo,

or TV/VCR/DVD Player Combo press VCR/PVR once.After programming

a VCR Combo device, you will be able to control channel selection,

volume, and VCR functions.

NOTE: To program control of a DVD Player,DVD Player/VCR

Combo, or TV/DVD Player Combo, press DVD once.After programming

a DVD Combo device, you will be able to control channel selection,

volume, and DVD functions.

NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR)

Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)
Combo, press CBL/SAT once.

[3] Press and hold SET until the LED (red light) blinks twice,
then release SET.

[4] Use the Manufacturer's Codes (starting on page 18) to

locate the type of device and brand name and then enter

the first four-digit code for your device. If performed correctly,
the LED will blink twice.

NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter
the same code again.

[5] Aim the remote control at the device and press POWER

once.The device should turn off. If it does not, repeat

steps 2 through 5, trying each code for your brand until

you find one that works. If it still doesn't work, try
Searching For Your Code on next
NOTE: If the device does not have a POWER key, press PLAY
OK.

does it have HDMI INPUT/OUTPUT? OR Audio video input/output? First you must have a cable for either of those two. HDMI (from the lcd tv) to HDMI (vcr/dvd combo).
audio/video input (from the lcd) to audio/video output (from the vcr).
hope this helps.

I just found my booklet for the Jumbo Touch Screen Remote Control
item no: NV-00268
if this is your remote; list the device and model name for the codes you need and i'll do my best to help

read here
http://www.fixya.com/support/t225581-code_polaroid_tv

Try 11256 . I don't have an all-in-1 . Just Comcast remote and I am now able to power/volume with that code.

I NEED OTHER REMOTE CONTROL AT POLAROID TBX-2000AF 20 IN TV/VCR/DVD COMBO. THANK YOU

I may be able to help with your Universal remote and your Polaroid LCD HDTV.

You can find some Polaroid HDTV Remote Codes here.

I hope that helps.
______________________________________
Polaroid HDTV Remote Codes
Polaroid FLM-3232 Manual Download
Polaroid FLM-3232 Service Manual Download