Magnavox 0054, 0706, 0030, 1454, 1254
How do I program my remote control?
For remotes that have blue arrow and Select buttons and 4 separate mode buttons (SAT TV VCR AUX):
*If you start this procedure and at any time do not press a button within 20 seconds, the remote will end the procedure automatically. Simply start over again.
For remotes that have one Mode button at the top:
*If you start this procedure and at any time do not press a button within 20 seconds, the remote will end the procedure automatically. Simply start over.
Click here for codes for remotes with blue buttons.
Click here for codes for remotes with gray buttons.
Click here for codes for platinum (DVR) remotes.
SEARCHING FOR YOUR CODE
If your device does not respond to the remote control after trying all codes
listed for your brand, or if your brand is not listed at all, try searching for
your code.
NOTE: Before performing a code search for a DVD player or a VCR, turn on the device and
insert the required media.
For example, to search for a code for your TV:
1. On the remote control, press TV once.
2. Press and hold SET until the LED (red light) blinks twice,
then release SET.
3. Enter 9 - 9 - 1.The LED will blink twice.
4. Aim the remote control at the TV and slowly alternate
between pressing POWER and TV. Stop when the TV turns off
(after pressing POWER). If the device does not have a Power
key, you can substitute another function, such as digits 0 ~ 9 ,
CH, or PLAY).
NOTE: In the search mode, the remote control will send IR codes from
its library to the selected device, starting with the most popular code
first.
5. To lock in the code, press and release SET.The LED will
blink twice.
6. To search for the codes of your other devices, repeat steps
1 through 5, but substitute the appropriate device key for
the device you are searching for.
here is the maual for your remote:
http://www.ofausa.com/remote_manual/URC4...
here is yor manual
http://www.ofausa.com/remote_manual/CTGA...
Here are your codes
http://www.ofausa.com/list_codes.php?db_... 3021
If you dont see your product try a code search funtion. If this does not work your remote might not support your unit.
×
496 views
Usually answered in minutes!
ned code #
How do you set the URC-3021 Remote Control
I HAVE A NEW REMOTE UNIVERSAL AVEX R6 BUT IT WILL NOT OPERATE MY DISH NETWORK SAT THE AUTO SEARCH CANT FIND THE CODE TO OPERATE IT
I need the codes to program this remote for RCA and Phillips TVs
Any luck. I have a VIP211 receiver adn the AVEX R6 remote, with no luck
I guess I will just have to go buy another remote because the AVEX-R6 does not turn off my Emerson and I have pressed every doggone 3-digit code in the manual...sheesh
×