My technician password has been changed. What is the backdoor password to get in? The 4321 default was changed and I do not want to reset all and have to reprogram. Samsung DCS Compact Prostar phone system. I appreciate the help.
SOURCE: Samsung DCS Compact: How to connect MOH
Hi Dave,
Sorry I've been out of town and I'm just catching up. I looked at the info I sent to you and eventhough it is under the heading of Compact I think it is for a Prostar. The info is under the DCS heading and is called " DCS Technical Manual August 1995" Pages 186, 187, 197 and 200. I have not given up and I'm looking through my other reference materials but you are right, there are a lot of user and programming guides but no installation guides. I'll keep trying, so do not give up. "Talk" to you soon ....Mitelmike
SOURCE: How do I change the name on my Samsung Prostar DCS 24B phone?
To Program an extension name:
1 Press the TRSF key and dial 104
2 Enter the name using the dial keypad like you are texting
When the next character you want appears on the same key press the volume UP key to move the cursor on space to the right.
To make any changes press the volume DOWN key to move the cursor to the left .
If you want lower case letters press the A key brfore entering letters.
3 Press the TRSF key to store the name
HTH
Jo
SOURCE: Samsung Prostar 816 Phone System
By default, the password is 1234.
If you need to reset the default data:
Remove the front cover from the ksu. There is a memory on/off shunt switch toward the bottom right side of the pcb. (looks like a small wire hooked under another). Open that switch. If you need to use something to do this with make sure that it is non conductive.
Remove power briefly, return power to the system and the default data will replace all other data. Close the shunt switch and go about your programming. NOTE: you will loose all custom programming by doing this and unless you know the features you need and what they are called I would recommend you not reset the cabinet.
Good Luck,
BB
SOURCE: How do I change the date & time on our Samsung
Please follow the steps :-
1) Press transfer.
2) Dial 800.
3) Enter passcode = (try 4321 or 1234)
4) Press 1.
5) Press the speaker button.
6) Dial 505.
7) The display will show.
WMMDDYY:00:00
w=day of the week (1=Mon. - 7=Sun.)
mm=2 digit month
dd= 2 digit day
yy=2 digit year
time must be entered in military time when done press Transfer.
I hope I was able to help you.
1,760 views
Usually answered in minutes!
×