Question about Zanussi Dishwashers
SOURCE: GE Adorda dishwasher
This one is a known issue and an easy fix. Use a tie wrap to securely tie the water tube for the middle spray to the upper basket. That's it. Believe it or not, it's that simple. You may want to secure it at the front and the back. To test this you can use the tie wraps used to closed the plastic grocery or bread bags. If this solves the problem you can buy a bag of nylon tie wraps from any hardware store. I had a similar problem with another GE model with a similar problem. The dishwahser used to make a horrible grinding noise during the wash cycle. One I secured the middle sprayer arm the grinding noise went away.
Posted on Sep 20, 2007
SOURCE: zanussi da4342 dishwasher
The dishwasher should heat the water to about 55 C as the heating cycle starts.
In these cycle, the dishwasher pauses after has filled with water and wait for the water to reach the temperature.
If the water isn't being heated (because of a problem with the heating element or thermostat), after the unit stops at the heating cycle, it never continues.
Another possible reason is that the timer unit is defective. If you have observed anything different post a comment.
Posted on Jan 12, 2008
SOURCE: Zanussi built in aquasave zt 685
I think I had a similar problem to this. It seems like it was starting a cycle but then it just stalled and made a buzzing noise and it did not drain properly. I opened the bottom of the dishwasher where the draining pump was located. take off the plastic cover and I found bits of broken plates were jamming the fins on the pump... Try this and see how it goes.. Hope it was of some asistance.
Posted on Mar 09, 2009
Tips for a great answer:
Aug 21, 2018 | Zanussi Dishwashers
Jan 05, 2015 | Baumatic Dishwashers
Oct 13, 2014 | Whirlpool Dishwashers
Jul 26, 2013 | GE GSD3200J Dishwasher
Aug 03, 2010 | Zanussi 24 in. DA6153 Free-standing...
Feb 13, 2010 | Dishwashers
Jun 12, 2009 | Roper 24 in. RUD4000M Built-in Dishwasher
Oct 22, 2018 | Zanussi Dishwashers
48 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: