Question about Graco Baby Gear

Open Question

I have a question about a Graco 3400 line stripper

Posted by buddy harmon on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Line starts wide then gets norrow.does good spraying thin products . Ian using a 319 tip. Could the paint be to thick for a 3.19

This sounds like a loss of pressure after you first pull the trigger, if that's it, your filter is likely to be full; its the tall stainless steel cylinder on the right side of the sprayer when you look forward. The filter comes out with the big knob on the top. When you have cleaned it out, or replaced it with a new one, when you screw it back, it only has to be hand tight

May 24, 2015 | GRACO INC LineLazer 3400 Airless Line...

1 Answer

How do i rewire c15 socket for hot condition 6a line

Black wire to the brass screw
white to the silver
green wire to the ground

Jun 21, 2014 | Earlex LMB150 Steam Master Wallpaper...

1 Answer

My graco linelaser 3900 IV pulsates/winks

Hi Brendan,

Your LineLazer is probably single stroking. This means that one of the 2 valves is not closing properly so that the pump is only working on the down or the up stroke. You need to switch off, depressure and open up the pump lower by knocking the lugs on the conical housing. Be careful not to lose any parts and note their order. clean out the inlet velve parts where the problem is usually found. With the inlet valve housing removed check the outlet valve in the end of the piston; use a small screwdriver and a torch; you will have lie on your back to do this. Call Lion Industries on 01543 251 560 if you still have a problem.

David Dundas

Jan 19, 2014 | GRACO INC LineLazer IV 200 HS Airless Line...

1 Answer

Im lookin for shoes that r like the ones that strippers wear

Try searching for Mouse Stripper Shoes or try to go this link to see the top 10 stripper shoes.
Hope this helps! -jayps

Mar 15, 2011 | Naughty Monkey Double Decker Shoes

2 Answers

I have inheirited a Poulan counter vibe 3400 it

Go to then parts diagram then illustrated parts online then parts look up then select oem poulan then poulan then saw then look at list of models you will find 3400. Have worked on one or two of the 3400 and they seem to be a fairly good saw for home use.

Apr 07, 2009 | Poulan Garden

1 Answer

Icemaker Ice Stripper Arm

just get a new im son quit n riggin the thing

Jun 15, 2008 | Whirlpool GD5SHAX Side by Side...

Not finding what you are looking for?
Baby Gear Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Graco Baby Gear Experts

Vincent G
Vincent G

Level 3 Expert

2363 Answers

Matthew Boulden

Level 3 Expert

440 Answers


Level 3 Expert

2239 Answers

Are you a Graco Baby Gear Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides