Samsung bluetooth hm1800 Blue light is not working ?

To pair the headset in manually pairing mode:
1. With the headset off, press the center POWER button for 7 seconds until you see the headset blue light turn solid blue (no loneger flashing).
2. The indicator light will turn solid blue, which indicates that the headset is in "Pairing mode".
3. In the phone, you now have to add the headset to the phone's list of Bluetooth devices.
4. You have to enter a Bluetooth passkey in the phone. The default passkey is 0000.

These directions apply to a lot of different bluetooth headsets. If "0000" (four zeros) does not work, try "0001" (three zeros and a one) or "1234".

Hope this helps!

Do you have a question about this Samsung unit?

Press The power button for 10s or more of your headset. When both blue and yellow lights flashes then put on bluetooth of your phone and connect it.
It works. I know it cause i have tried in.

1 Enter Pairing mode. • Turn off your headset and press and hold the talk button until the blue indicator light remains lit after blinking. • If you turn it on for the first time, it proceeds into Pairing mode immediately.
2 Search for and pair with your phone --> turn on the bluetooth with the widget on the home screen or in the settings. (Bluetooth PIN: 0000, 4 zeros)
• If the pairing is successful, the blue indicator light will flash 10 times rapidly before entering Standby mode. • If the blue indicator light remains lit, retry pairing.
Good luck!

this works with the Samsung range quite well also but you must get the sequence correct - phone blue tooth active BEFORE you turn on the headset then press and hold the on button until the blue light stays solid blue.

-Actiaved your blue tooth in ur mobile keep it in visible mode
-then switch on your bluetooth make sure that light on bluetooth should glow
- then search for devices from ur mobile.
-you can find the blue tooth device ( it will requst for some Code just enter 1111 o 0000 )
- then you can use it

Try to use passkey 0000

Hi,
If you have lost the pairing on your Blackberry with the headset follow these simple steps below:
• Setting the headset into pairing mode
1) Ensure the headset is fully charged
2) The headset must be switch off
3) Press and hold the on button for +- 8 seconds until the light flashes red-blue
4) The headset is now in pairing mode
• Searching for the headset on the Blackberry
1) Go to “settings” or “connections”
2) Select Bluetooth, then options
3) Select Devices and click add
4) The Blackberry should search for any available Bluetooth devices and display what was found
5) Select the Samsung device and click add
6) You will be required to enter in a pass code which is standard ‘0000’. If not try '1234'.
7) If successful then the headset will start flashing BLUE every few seconds.

• The headset is now paired with the Blackberry

Hope this helps

Chris (ziraffa)

Try 0000

Pairing: Press and hold until you see a solid blue light (approximately 8 sec) then release. Search with your blue tooth phone for a bluetooth device and if finds samsung wep-150. enter pass key or pin: 0000