Question about Home
Press set button repeatedly -you get timezone mode and change your wished time zone and select your zone then press set button to normal mode and adjust the current time. kindly gave your rating after you read this.
Posted on Nov 20, 2008
If you manually set the time, the chimes will be off unless you wait for the chiming to finish before continuing to turn the hands.
Press the TEST button to get the correct number of chimes in synch with the actual time.
Posted on Jul 03, 2009
Are the hands held on by a nut? usually you can remove the nut with your fingers or a pair of pliers wrapped in cloth or duct tape to prevent scratching.
Before removing turn the minute hand (minute hand only and clockwise only; do not manually turn the hour hand and never counter-clockwise) turn the minute hand clockwise until it chimes at an hour mark.
Then remove the hands and and place them pointing to the correct time.
If you are uncomfortable with this I recommend taking it to a clock shop or jeweler that sells clocks. If it is inherited, it may need some maintainence (oiling and regulating) anyway.
Posted on Oct 17, 2009
Take the batteries out from the base, where the chime mechanism is. Wait till it gets close (20 seconds till) to a specific hour time, like 8:00 or 9:00, replace the batteries for the chime mechanism. And then count the chimes at the hour. If they are correct, you are set. If they are incorrect, turn the time back 15 minutes before the hour and bring it right back and monitor the chimes again. Hopefully this should fix it. Please post the results.
Posted on Nov 10, 2010
Tips for a great answer:
Apr 19, 2016 | RIDGEWAY GRANDFATHER CLOCKS Ridgeway...
Sep 21, 2015 | Seiko Mantel Clock
Dec 17, 2014 | Home
Dec 17, 2014 | Home
Feb 10, 2013 | Opromo Kassel 15-day wood wall clock w/...
Nov 06, 2011 | Seiko Mantel Clock
Mar 13, 2010 | Watches
Jul 29, 2009 | Seiko Mantel Clock
Mar 29, 2008 | Office Equipment & Supplies
85 people viewed this question
Usually answered in minutes!