LifeCam 1.1 My CD can't complete the download evan though I've use the compatability feature available in the Vista OS. I always run into an error.

To download the CD's contents go to:

Which operating system are you using

select your Windows OS from the pull-down menu.
Note: only Windows 98 to Windows 2000 (and all OS's in between them) are available for selection. If you're using Windows Vista, 7, or 8 you will have to download one of the available versions and use the Compatibility feature of your OS.

Introduction UNetbootin allows you to create bootable Live USB drives for Ubuntu, Fedora, and other Linux distributions without burning a CD. It runs on Windows, Linux, and Mac OS X. You can either let UNetbootin download one of the many distributions supported out-of-the-box for you, or supply your own Linux .iso file if you've already downloaded one or your preferred distribution isn't on the list.
Requirements

• Microsoft Windows 2000/XP/Vista/7, or Linux, or Mac OS X 10.5+. Note that resulting USB drives are bootable only on PCs (not on Macs).
• Internet access for downloading a distro to install, or a pre-downloaded ISO file

Features UNetbootin can create a bootable Live USB drive, or it can make a "frugal install" on your local hard disk if you don't have a USB drive. It loads distributions either by downloading a ISO (CD image) files for you, or by using an ISO file you've already downloaded.



The current version has built-in support for automatically downloading and loading the following distributions, though installing other distributions is also supported:

there is no downloadable driver for windows 7 32-bit and 64-bit but there are available software download for windows xp,vista,mac os and linus. here's the link: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=228&lc=en&cc=us&dlc=en&sw_lang=&product=422000#N195
steps:

• select the operating system and click on next
• download and save the full feature software and drivers so you can also use the scanner feature of the printer
• run the software when download is complete

Visit the Microsoft hardware support page
http://www.microsoft.com/hardware/download/download.aspx?category=ICE&type=LifeCam&sku=68A-00001
Fill in the details and click 'GO'
Check out all the information available by clicking on the link:-
"Microsoft LifeCam Readme and Troubleshooting Information"
A lot of information can be found here, Including the latest software to download and Customer Support
Check out any additional software you have to download if you are running Vista or Windows 7
Procedure for installing the Lifecam software using the website.
Close all programs while uninstalling - downloading and uploading software
Disconnect your webcam
Uninstall the current webcam software on your computer
Restart computer
Download the Installation package from Microsoft
Run the installer and choose your options when prompted
Connect your webcam when prompted.
If the problem persists try running the webcam in Compatibility Mode
Right click on the webcam icon on your desktop or the webcam file from 'All Programs' - select 'Properties'
Select the 'Compatibility' tab
Select 'Compatibility Mode'
Use the drop-box to show an earlier OS you have successfully used before
Click OK
Restart your computer

Check out the Microsoft support for your model
Fill in the details of your webcam/OS and then check out the "Readme" links - you may need additional software or re-install the software from here

http://www.microsoft.com/hardware/download/download.aspx?category=ICE&type=LifeCam&sku=68A-00001

Hi


You can download the drivers for your printer from this link---

HP F4280 printer's driver

After opening the link, select your operating system (win xp/vista,etc). After downloading the driver on to your computer, run the setup and install it. After installation is complete restart your computer.

Daniel Scott

You can download the Vista compatible driver from
http://www.microsoft.com/hardware/download/DownloadResult.aspx?category=ICE&type=LifeCam&name=68A-00001&os=WVista_3264&lang=en
Please rate this solution. Thanks.

Hi,
http://www.microsoft.com/hardware/download/download.aspx?category=ICE


Here is what you need!!! Click on the Above Link.Select Your Model and OS then Download Drivers!!! 




Hope This Helps!!!  Please Don't Forget to Rate my Response!!! Thanks!!!

PREM

HOW CAN I DOWNLOAD SOFTWARE FOR MICROSOFT LIFECAM VX-1000

Did everything above ,kept getting the same ol errors,i right clicked
on the app,opened properties,and changed compatibilities to win xp. then, instead of opening the rebirth from program files,i went and opened a demo song from the rebirth folder, and hey presto the ***** opened,after that the program would open the usual way.
yippeeeeeee........