My citizen cl s700 get error message alarm check head

REPLACE HEAD

Check that the printer head is closed then press clear (CL)

Somehow the printer is set to print two labels such as a shipping label and a return label. Rich

we had this issue


Clean the pathway/rollers/sensors included with IPA..should solve it..try changing the ribbon too.
There must be some paper piece or oozing of adhesive...or the paper width might be holding the unwinding.

ASHOK

Hi,

Stop a print job
1) press Pause button ..if reqrd continue..its the left button
2) want to stop the print mode...switch of printer & switch on the data in the memory gets errased

Not an expert on this but have 4 printers doing constant print jobs for customers.

The alarm-setting process for your Citizen Promaster watch is similar to the process used to set the time and date. Access the Alarm mode on your watch by pressing the bottom left button until "AL" is displayed. Use the watch's bottom left button to advance the flashing and the buttons on the right side of the watch to set the alarm to the desired time. If that doesnt help, then I would HIGHLY suggest you ask Citizen at their website as follows: http://www.citizenwatch.com good luck

replace home sensor

After you do what the error message says then you have to go through the keyboard and clear the error as per the user manual instructions. God bless.

Is "CH" steady or flashing? If it's steady, the door is not shut properly.
If it's flashing, the machine doesn't detect the presence of the toner cartridge (defective toner cartridge). Try another toner cartridge (an empty cartridge will do).

To get the blue handle to stay locked sometimes takes fiddling with it when the cartridge is in.

Error message CL solved. CL means child lock. To deactivate press two linked buttons (on my machine the right options button and the temp button) together for a couple of seconds.