Can i purchase a replacement blade assembly for my ge blender model 169053

Contact GE.

On the Vitamix blender models we have here in NZ it is not possible to repack the bearings, you just purchase a new blade assembly complete with bearings and the driving clutch.

I have one for sale.

Older KitchenAid blenders had a jar that was made so the blade assembly could be removed for cleaning. On the newer models the blender jar and the blade assembly are all one unit so you have to purchase a new jar to get the blade assembly. All of this is dependent on which model of blender you have.

We would be happy to help you. Please a give us a call at 1-800-339-9297 we would be happy to help! One of our repair technicians can talk you through the repair over the phone free of charge. On the bottom of your blender is the model and serial numbers; have these handy when you call so we can help you order the correct part.

We have several blender jars on our Web site http://www.mendingshed.com/kitaidblen.html for KitchenAid blenders. If we don't have the blender jar that fits your model in-stock we can order it and ship it to you. Please contact us with any further questions. You can also email your model number or questions to [email protected]

Sincerely,

Mendingshed.com Staff

By now I'm sure you've given up, but do you still need the jar? I have one that is now useless to me since my son tried to run the blender when the jar and base were not seated correctly and the rotors on both were worn off.

Look at the underside of the blade shaft. The metal wing nut on the end of the shaft secures the blade assembly to cream coloured plastic blade base. The wing nut also transmits the drive from the rubber coupling on your blender to the blade shaft. The wing nut has a LEFT HAND thread.
The left hand thread ensures the blade assembly does not unscrew during normal blender use.

Firstly disassemble the blender blade assembly. Place a folded tea towel over the blades and hold the blades firmly. If you do not use a tea towel you may cut yourself.

Grip the wing nut with your other hand and unscrew it CLOCKWISE.
Remove the wing nut. You can now remove the blade from the plastic base.

Put the blade assembly in the new jug and offer up the plastic base from under the jug so that the blade shaft protudes enough for you to install the wing nut.

Screw the wing nut ANTI-CLOCKWISE to secure the blades to the plastic base.

Do not over tighten the wing nut; you may have to replace your jug again at some point.

Remove the bottom clean the unit fully. Add the bottom blad assebly and this will fix your problem. The "sooty" is plastic shavings. Take note that the fitting were the "jar" connects to the motor that this is not wearing away. The unit i have broke and i am unable to find a replacement blade assembly.

http://www.google.com/aclk?sa=l&ai=CYtSpn0G9ScrcK4uotgfv5JiVCpLgjCzukaG1A9P7mgoIABADIOasrgsoA1CswIjp_P____8BYMm2uIvApNgPoAGTr4__A8gBAaoEIE_Qc-nLWKRMu2t_Q6rdF-beKx7zEaleZ1lSkPy3PpDT&sig=AGiWqtwkeiPcRxmgu1zsjQwlSLLWPfLeAA&q=http://www.smallappliance.com/department.asp%3Fcur%3DUSD%26sid%3D18954%26mid%3D34%26shopBy%3DBrand%26cam%3Dwaring

Should have it here

1800KENMORE

I will buy the blade set from you? I will return....