How do I set up my memorex MLTD2232 tv for cable use

check input or source and then check audio settings

Hi,

Did you try setting and finding the other missing channels manually?

This was a top google search hit at the time of this writing. We have an old Memorex MLTD2232 that has been missing a remote for ages. Our Philips universal remote is model SRP9232D/27.

This TV is an Orion TV/DVD combo that is rebranded to Memorex and Sansui.

We found the code in Sansui DVD codes in the code booklet:

0015

I hope this helps the 2-3 people left in the world with one of these ancient LCDs.

Try '0000'.

• How to Program Your Remote for the Memorex MT1134 TV

10016, 10106, 10150, 10154, 10178, 10179, 10463, 10877, 11911, 11926, 20162, 21037, 21162, 21237, 21262

Set the "Mode Switch" to TV.
Press and hold the "Mute" button and the "Select" button until the visible LED blinks twice.
Enter the 5 digit Code above

If not success, you might wish to purchase a remote for $19.95 where these codes shown above are listed:

19 95 Memorex MT1134 TV Remote Control Free Shipping

Regarding the problem with the sound on your DVD player, I would suggest you to make sure the audio cables (red and white) are connected properly to the TV and player.

Also, try using a different set of cables since those ones might not be working and this is why you are not getting audio. On the Memorex remote you will find a mute button, make sure it is not activated.

Check your tv set, set it on outo program scan set it into CATV.

Just hook your antenna or whatever wire you have currently connected to the TV to the input on the new recorder, and you'll be to record anything you can watch now.

have you tried pressing the TV/CATV on the actual set itself or going into the menu and changing the signal input to Cable or Air?

set to cable mode