Question about Philips Televison & Video

1 Answer

My plasma tv has a red light flashing on the

My Phillips plasma tv has a red light flashing on the bottom left hand side. The tv won't turn on. Is there something I can do to fix this? The tv is just over a 2 years old. It clicks on for a second and then starts to flash red. There is no picture or sound.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

You have to bad compacitors on the power board. They will be buldged on the top. Once replace you TV will live again. The parts will cost you about $4

Posted on Mar 04, 2010

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Panasonic tc-p60gt30 won't turn on. Something hit screen. Screen did not crack but now won't turn on


May have damaged the PDP (plasma display panel) inside---if the panel which is fragile shorted inside it will trigger shutdown.

Aug 28, 2012 | Panasonic 60 TCP60GT30 3D Plasma TV

1 Answer

The TV will not turn on. When the switch at the lower left corner is pressed the light in the switch flashs green for about 4 seconds as the TV seems to go through a start up procedure. Then the light...


The red flashing light is the service code. My guess is the power supply is bad now, but it could be something else. If the TV is under warranty, take it in and get if fixed. If it is not, then you may try to check the power supply first. Count the flashes of the red light and check online for the issues when this model flashes, 4 times or 6 times... or 9 times, etc.

Good luck!

Oct 10, 2010 | Panasonic TH-46PZ800U Plasma TV

1 Answer

I have a Phillips 42 inch Plasma. I tried


One of two issues/problems:
1) Main Power supply problem
2) High Voltage Power supply problem.
A Good TV Service Shop that works on Philips would be the first place I'd call. It will be much cheaper to bring the TV into the shop instead of having a tech come out to your location.
Possibly a $200 to 300 dollar repair.
Blessings,
A/V Media Guy

Nov 23, 2009 | Televison & Video

1 Answer

Black strip down the right hand side on my viera plasma


Hello

black strip down the right side its about 2 inches wide there are also red and green flashing lights that is defective shorted capacitor at power inverter board section that was 300uf 200volts.

Angel
Thanks...

Aug 02, 2009 | Panasonic Viera TH-50PZ80U Plasma TV

1 Answer

Phillips 42 inch LCD 42PF9730A Redlight flashing


Common short the cover cap over the video & sound boards short out if you remove it the cap only (shield metal) it usually will fix this

Jun 16, 2009 | Philips 42PF9631D 42 in. Plasma Television

1 Answer

I have a phillips matchline plasma the power light keeps flashing green then starts flashing red is there a problem with the connection between the tv and the master box?? plz help!


According to " Consumer Affairs. com", the problems with seris of Phillips plasmas are innumberable. And they all start with the flashing red light, from 3 - 7 times. Baased on the information you gave, there is something wrong with the TV itself, not your perifrials. I would contact Phillips/ Magnavox to see if they will pay for an authorized sevice center visit, or even ship you a part to solve the problem.

Apr 11, 2009 | Mitsubishi WS-65513 65" Rear Projection...

1 Answer

Our 52 inch Phillips Plasma tv is not working


open the back of the set and inspect the power supply board -- there should be two fuses on the board- they cost around 2 dollars at radio shack -- check all connections for wear or damage -- there are two boards in most televisions -- a power supply board and a audio / digital board -- one is probably board

Feb 28, 2009 | Philips 42PF7220A 42 in. Plasma Television

1 Answer

Philips Plasma NO LIFE


I had the same problem (with 42FD9954/17S) that when turned on the unit, the green LED turned off and came back to red again some time later. I kept turning it on and once it went to a clicking relay sound and blinking green LED with it. It did that for a while and stayed turned on. I noticed that it is temperature sensitive. Colder the room is more often does it. Used a hair dryer and blown hot air into the unit at the left bottom grills. It helped and started to tun on quicker. Later it has deteriorated so bad that I took it a part and after several ice spraying test showed that on the middle big board (power board) there was an electrolyte condenser went bad. It is the one one which is at the middle, bottom center of the board near the fixing screw. There are two of them (cylindrical objects). The left one was the culprit. However when I fixed it, it turns on immediately but goes blinking red after that. Phillips say it is a static discharge problem. I might blown something when soldering the parts. I don't know what. Any ideas?

Dec 21, 2007 | Philips 42HF7444T 42 in. Plasma TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

654 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76204 Answers

ThaMp3Doctor
ThaMp3Doctor

Level 3 Expert

8597 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...