Question about Stihl Saws

Open Question

I have a stihl cut off saw inside the crankcase it has the numbers 911080210700 it has i5 on the casing, which model is this?

Posted by Carl Molyneux on

Ad

5 Related Answers

John Trevino

  • 1420 Answers

SOURCE: stripped bar stud

Many Sthil chainsaws have replaceable bar studs. The stud threads into the case. Go here: http://www.baileysonline.com/itemdetail.asp?item=QA+0000+953+6605&catID=407
look for part by model number, usually no more than a few dollars. Enjoy

Posted on Dec 21, 2008

Ad

Anonymous

  • 4 Answers

SOURCE: how do i replace the pull cord on my stihl cut off saw

it is gonna take some time,take all screws off housing,pull casing off,be careful with the rewind spring and be sure you have spring wound-up for re-install.

Posted on Apr 24, 2009

Ad

Anonymous

  • 1 Answer

SOURCE: Chain Saw, Stihl Model 011, cutting off

I've been messin with my poulan 2150 that was doing the same thing. Good, fresh gas, good spark,etc. I noticed whenever I loosened the fuel cap it would literally spray gas out! alas, I removed the muiffler assy and the darn thing fired up the first pull! I've got the muffler parts soaking in gas right now and I'm sure this the problem. It just makes sense especially if you use the same 'mixed fuel' can for weed eater, blower,etc. Check your's out, it could very well be your problem too! GOOD LUCK

Posted on Apr 29, 2009

dontbother10

dontbother10

  • 2220 Answers

SOURCE: Need replacement crankcase for Echo CS-750EVL chainsaw

There are 2 complete CS-750EVL saws on my local Craigslist.
Try here for Echo IPL:
http://www.echo-usa.com/pdf/documentation/CS750EVL_010185.pdf

If not your saw:
EchoUSA
http://www.echo-usa.com/documentation.asp
Type your model number into the search window.
Good Luck

Lou
http://seattle.craigslist.org/see/tls/1571477399.html
http://seattle.craigslist.org/tac/tls/1571683044.html

Posted on Jan 27, 2010

Anonymous

  • 23 Answers

SOURCE: changing spark plug on a Stihl 410 cut off saw,

right by the decompression valve is the spark plug. if you remove the one screw for the valve you will see that to get access to the plug is very easy,

Posted on Mar 04, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I gap ignition module on a TS350 Stihl concrete saw?


I thought the unit was under the flywheel, in this case there is no gap to set it just screws to the crankcase and you re fit the flywheel.

Sep 18, 2012 | Stihl Chainsaw Cutoff Saw Flywheel 08 S...

1 Answer

Hi,my stihl ts 410 saw cuts out after about 10 minutes work,it restarts soon after then cuts out after about 10 minutes again? any ideas,thanks dave


Sounds like an overheating problem.
Are you working in a well-ventilated area or in direct sunlight?
Check, if you can, the temperature of the motor case.
You might have to take a break more often.
This hot summer has stressed a lot of motors and electronics.
When it shuts off you know it is trying to save itself from burnout.

Aug 29, 2011 | Stihl Ts 410 420 Cut Off Saw...

1 Answer

STIHL TS760 cut off saw repair manual needed


Hello. Found the link for downloads, they also have contact info should your model not be online. http://www.stihlusa.com/information/info_product2.html

Hope this helped.

Mar 18, 2011 | Stihl Ts 510 760 Cut Off Saw Repair...

1 Answer

I need to replace the gas hose that goes to the crankcase on a stihl ts760 . Whats involved in doing this repair


This is not difficult. The impulse hose as it is called presses on to a brass fitting under the intake manifold. remover the filter housing, filter, carburetor, and tank as needed to make room to get in and replace it. Parts can be ordered from you local dealer like www.arcolawn.com

Hope it helps

Joe

please vote me up if it did help.

Jan 11, 2011 | Stihl Ts 510 760 Cut Off Saw Repair...

1 Answer

Where is location of serial number on a 420 stihl cut off saw?


The Serial is engraved into the aluminum right next to the muffler. Look from the top down and you will see it. Good luck
barterjoe_11.png

Nov 07, 2010 | Stihl Ts 410 420 Cut Off Saw...

1 Answer

Does carb work under crankcase pressure cause petrol coming out of carb when engine stopped,


If the unit is leaking fuel out of the carburetor when the unit is not in use then it is usually the needle sticking open. This can be from a piece of grass or other debris getting under the needle and keeping it open. Alternatively it could be a bad diaphragm that is leaning on the needle and keeping it open.
As always it is recommended that you take the unit to a Stihl dealer with a Gold Certified Technician for parts and repairs.

Nov 06, 2010 | Stihl Chainsaw Cutoff Saw Flywheel 08 S...

1 Answer

Every time I cut more than 20 mins it wants to stall and then doesn't want to start again...I cleaned the air filter incase i was overheating (which it does) and still a problem. Now it is cold and just...


You don't give us a model or serial number, nor the age of your saw. Has it ever been tuned by a chainsaw mechanic? A tune up replaces the spark plug and a few other items. It includes a visual inspection and perhaps a pressure test or two. The final thing is to adjust the carburetor for better operation. My Husky 359 gets tuned about every 3 years by the local Stihl dealer at a cost of $40. I have a Husky dealer closer to me but I prefer the Stihl mechanics.
Heat is an indication your saw may be lean, in extreme cases it causes metal transfer from the piston to the cylinder wall and can destroy your saw. It should always be operated with a clean air filter.
The one thing you might try is once your saw attempts to stall is to rotate it enough to loosen the fuel cap. If it smooths out your fuel vent is plugged.
You can find an Operator's Manual and IPL here:
HusqvarnaUSA.com
http://www.husqvarna.com/us/homeowner/support/download-manuals/
Enter the 3 digit model number (no XPs, Es, just the numbers)
Serial number decode – for use with IPL
06 1500198
06 = year produced – 2006 (single digit before 2000)
15 = week produced - March
00198 = 198th unit Husky produced that week
I'm concerned about the heat, If my saw the local Stihl dealer would have it. Explain the problem you are having it may aid in repair or diagnosis.
HTH
Lou

Nov 07, 2009 | Husqvarna Chain Saw 20" Bar

1 Answer

How do i replace the pull cord on my stihl cut off saw


it is gonna take some time,take all screws off housing,pull casing off,be careful with the rewind spring and be sure you have spring wound-up for re-install.

Apr 24, 2009 | Saws

1 Answer

Stripped bar stud


Many Sthil chainsaws have replaceable bar studs. The stud threads into the case. Go here: http://www.baileysonline.com/itemdetail.asp?item=QA+0000+953+6605&catID=407
look for part by model number, usually no more than a few dollars. Enjoy

Dec 20, 2008 | Garden

Not finding what you are looking for?
Saws Logo

Related Topics:

168 people viewed this question

Ask a Question

Usually answered in minutes!

Top Stihl Saws Experts

Cindy Wells

Level 3 Expert

6220 Answers

Pieter Vleeshouwers
Pieter Vleeshouwers

Level 3 Expert

2027 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Are you a Stihl Saw Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...