Ovens Logo

Related Topics:

Question about Belling Ovens

Open Question

How do I replace the thermocouple on a belling G756 oven. Not the thermostat!

Posted by Peter Tabrar on

Add Your Answer

1 Related Answer

Anonymous

  • 4323 Answers

SOURCE: we have an old wolf

Hi

The issue can either be a bad electronic control/clock assembly or the oven temperature sensor (probe) has gone bad. To solve this issue start by checking the oven temp. sensor for 1100 ohms, if the rating is more then that then check the control and door switch and replace the part that is bad. Hope this helps...please post back for further assistance.

Daniel

Posted on Apr 08, 2011

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Belling double oven induction cooktop - multifunction oven thermostat
There is always the possibility that the replacement thermostat has failed.
Read full answer
Mar 02, 2022 • Belling Ovens
0helpful
1answer

Our belling double oven lets lots of steam and heat out with the door closed, and when it gets hot it cuts out. The grill also cuts out after 10 minutes. Any ideas please
One of the prime causes of your electric oven cutting out is the thermostat, this is a safety procedure that will protect your oven from getting too hot. ... The only real way to solve this problem is to replace the thermostat to ensure your oven doesn't heat up too much.

https://www.repairaid.co.uk/oven-repairs/my-electric-oven-cuts/
Read full answer
Apr 20, 2020 • Belling Ovens
0helpful
1answer

Thermadore WO-16A electric oven but the thermocouple has gone out.does anyone know of a replacement part?or at least part #?
I believe you mean a thermostat. Contact a distributor such as Automatic Appliance Parts at 800.323.0270
Read full answer
Nov 15, 2014 • Thermador Ovens
0helpful
1answer

My gas oven won't stay lit when knob is released
The thermocouple is faulty. This needs to be replaced by a registered gas safe engineer
Read full answer
Feb 22, 2011 • Belling Ovens
0helpful
1answer

My oven temperature fluctuates widely (50 degrees) in both directions and won't hold a consistent temperature. I see from the manual that I can adjust the temperature up or down, but this won't address...
Try replacing just the thermocouple. You don't say how old the oven is, but the thermocouple is the device inside the oven that takes a beating (especially if it is a self clean model) and needs to be replaced every few years. A failing thermocouple allows wide temperature fluctuations.
Read full answer
Nov 18, 2017 • Whirlpool Ovens
1helpful
1answer

Belling countrychef - Main oven gas doesnt stay on after ignition. We tried holding the knob in for 3-4mins but gas cuts out as soon as you let the knob go. there is no debris on the burner etc
the flame failure device has failed ,you will need a new thermocouple
Read full answer
Nov 18, 2009 • Belling Ovens
0helpful
1answer

Kenmore gas oven model no. 273 3248296 pilot free ignition wont fire up
Hi

If it won’t fire then it is possible that the oven control is not sending gas for the pilot light. The pilot light works but no main burner ignition - possible pilot assembly is dirty and the pilot flame is too small, safety valve and thermocouple is faulty, the bulb from the safety valve is out of position and the pilot flame is not touching the thermocouple bulb. Some ranges use a standing pilot light ( small flame is on all the time ) while others use an spark ignition to light the pilot light flame and the pilot light flame heats up the thermocouple bulb to allow the main gas to flow through the oven burner.
The flame needs to heat the bulb up enough to tell it to open the gas valve. Several things can go wrong here that keep this from happening:
The pilot flame may not be hot enough, usually because the flame is yellow instead of pure blue or is too small. The cause for this is usually a dirty pilot assembly. The pilot assembly would either need to be cleaned or replaced.
The thermocouple bulb may not be positioned properly in the flame. You can't heat the bulb properly if it's not in the pilot flame! The thermocouple bulb needs to be in the upper third of a pure blue pilot flame--that's the hottest part of the flame.
The thermocouple itself may be burned out. It happens. It's an internal part of the gas valve so, no, you can't just change the thermocouple bulb separate from the gas valve.
But when you turn on the oven or the thermostat calls for heat, the pilot flame gets bigger and jumps down so it can heat up the thermocouple bulb. This extra gas to increase the pilot flame size comes from the thermostat.
If the pilot flame jumps upwards or just gets bigger, but doesn't shoot down, then you need to replace the pilot assembly.
If the pilot flame size does not increase or jump down when turning on the oven thermostat, then the problem is the thermostat not sending enough gas to the pilot assembly. It's also possible that the pilot gas supply tube has a hole in it somewhere.
One final point on the spark-assisted pilot ignition systems. The spark comes from the spark module--the same module that sends spark to your surface burners to light them up. If you're not getting a spark when you turn the oven on, then there are several possibilities:
There could be a problem with the switch in the thermostat. You can confirm this by doing a simple continuity test of the thermostat contacts. If you don't read zero ohms when you turn the switch on, replace the thermostat.
The spark module could be bad. You'll need to measure the voltage at the oven terminals of the spark module when you turn on the oven. If you get 120v but no spark, it's probably a bad spark module. Replace it.
Could be a bad spark wire or broken electrode.

Please do rate the solution and revert for further assistance.


Thanks
Rylee
Read full answer
Sep 10, 2009 • Kenmore Ovens
3helpful
1answer

Belling synergie oven - main oven won't come on.
hi

check the timmer clock is not in auto mode as this will stop the oven from turning on. if clock ok then fault could poss be the thermostat
hope this helps you

regards dan
Read full answer
Mar 03, 2009 • Belling XOU174 Electric Single Oven
2helpful
2answers

Blodgett 961-P pizza oven
Go here find what you seek.
BLODGETT
44 Lakeside Avenue, Burlington, VT USA 05401
Toll Free: (800) 331-5842 Phone: (802) 860-3700 Fax: (802) 864-0183
Great Co.
Read full answer
Sep 30, 2008 • Blodgett 911-DOUBLE Gas Oven
6helpful
2answers

Belling Synergie fan oven.
the elemet has burned out round the fan
Read full answer
Dec 05, 2006 • Belling XOU174 Electric Single Oven
Not finding what you are looking for?

View Most Popular

Ovens

Related Question

Belling double oven induction cooktop - multifunction oven thermostat

  • Belling Ovens

Open Questions:

0answers

using my belling oven IB609FV
Read full answer
Be the first to answer Jan 19, 2019 • Belling Ovens
0answers

belling double oven turning my home and paintwork yellow
Read full answer
Be the first to answer Feb 04, 2018 • Belling Ovens
0answers

How to get into a Belling countrychef 100 DF to replace the fan oven and grill selector switch?
Read full answer
Be the first to answer Sep 25, 2017 • Belling Ovens
0answers

I have a new belling freestanding electric oven fs50edopc sta. On the ceramic hob one of the lights is permanently on even when cold. Is this a fault?
Read full answer
Be the first to answer Jun 26, 2017 • Belling Ovens

195 views

Ask a Question

Usually answered in minutes!

Popular Questions

WIRING FOR AN ELECTRIC COOKER (I NEED A DIAGRAM) !!!

Belling XOU174 Electric Single Oven

Fan making loud noise

Belling XOU174 Electric Single Oven

Belling Format cooker

Belling XOU482 Electric Double Oven

We have a Belling oven that we can't turn on.

Belling XOU482 Electric Double Oven

Belling synergie. oven

Belling XOU592 / XOU593 Electric...

Top Belling Ovens Experts

Marvin
Marvin

Level 3 Expert

85241 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

57104 Answers

The Knight
The Knight

Level 3 Expert

76851 Answers

Are you a Belling Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
Belling XOU174.pdf. user-manual-XOU174...

Belling XOU174...

PDF Manual
Http://www.excelkitchens.co.uk/PSD/Bel...

Belling XOU492...

PDF Manual
Http://www.excelkitchens.co.uk/PSD/Bel...

Belling XOU252...

Loading...