That's going to be hard to find. i wish i would've known. I just sold one on ebay and the person who bought it from me is reselling it. but if you still can't find it, www.pioneerelectronics.com has it brand new.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Sometimes the mechanism is misplaced, just disassemble that mechanism and turn on radio without the secondary plate and wait until the motor to get to the final position when it turns off again, reassemble.
there is a ribbon wire that connects the faceplate contacts behind the faceplate that always go bad on all radios with rotating faceplates. you can probably find this part on ebay or on parts.com or by jvc.
I have a faceplate for this model that I'm trying to sell. As we speak, I'm putting it on craigslist and ebay.
I don't have the actual CD player, all I have is the faceplate. Email me if you want to buy it.
Its a lil pricey but its actually an issue with the faceplate...the display has to be replaced.Its a common problem on the pioneer decks with the motorized faceplates. look on ebay for just a faceplate.
It could just be a plastic clip that broke.Most of the car stereo's ive taken apart only have a thin ribbon of wires that run into the contacts that your face plate connects to.If you actually took screws out of the faceplate then id put them back in and put it back into your stereo and see if it illuminates properly,if it does not then id search on E-BAY or contact pioneer and buy a replacement but most the time it would be cheaper to just buy new stereo.You might want to be more specific with the area you took screws out of,the way im reading it sounds like you unscrewed the screws in the face dock, not the faceplate.Hope this helps.