I need a book or manual for the operation of the Tickbox TV system. Does anyone know where I could obtain one?

NO SUCH THING IN USA. HERE.
ok 1988 is BINGO year and DOWN under in Wallaby land.
please stop reading prices from scalpers on line, it's endless worse every year.( 30 usd for books is par)

1988

e24 SOLD WITH 11 ENGINES, GAS AND DIESEL. TOTAL.
bingo for GAS(petrol)
no engine size told nor number of cylinders 4 or 6

no dealer on earth sells 1988 books. ever. show me one and I will be shocked to the core.
gee even some Nissan engineer retired, after 35 year later.

HERE IN USA
WE BuY FACTOR SERVICE MANUALS OFF EBAY USED, OLD ONES
ARE HUGE PAPER BOOKS, NO DIGITAL THEN. ever in 1988


THE USERS GUIDES, SAME ANSWERS THAT OLD BUT GOOGING FINDS THEM AND SURE SCALPERS ARE THERE. TOO. WWW AND EBAY (only by pure luck this old)

to search for books this old 38yu
use the year and country both. with car maker,model.
only that works .

wow 11 engines world wide. that is hard to guess and not told yet.


back then, I went to the dealer bought the huge thick 500 page service manual
and the counter man say ,you will need the tranny and engine supplement books too.
so what is it. he said.

the trouble with 1988 is things are classic and even super rare, for parts or books
and rare causes huge prices.
supply and demand,
users guides that old are rare,

For what, the whole car?
know that in 1991 only books were in print, not any kind of digital documents at all making that super hard to find. and 500+ pages./

ebay sells used books like that from 1991
the online books the coverage is super poor past year 2000 and older. due to weak , wrong or half heart scans. (yes you can luck out) but no online sources does full 500+ page service manuals this old.

try here
https://eautorepair.net/Marketing/Default.asp

1977 now that is a blast from the past.
finding books that old is hard, but are sold in book stores.
but from Carter, and very very old jeep books.
4 engine then
and 2 Carters, i see.
232/258cu-in, with YF carb
here ill paste the words

"To adjust the float drop, hold the air horn in the upright position and measure the distance between the top of the float, at the extreme outer end, and the air horn casting. The measurement should be 11/4 in. (31.75mm) to 1973, 13/8 in. (35mm) 1974-78. Adjust by bending the tab at the rear of the float lever."

You will not find that manual. They all assemble and are used in the same way. Find a manual that is similar to your scope and use it.

Off the Bushnell site here:

http://www.opticsplanet.net/bushnell-warranty.html

depending on which chassis, CTC 68-78, or CTC 85-90. Check MDR001 module, CR405 could be leaky.

Hi - You can download the manual from the link underlined in blue below:

78-9675



Please take a moment to rate this solution & let us know if the information given was useful to you - Good Luck!

Page 11 of the operating instructions have all the RS232 codes the display will respond to and the data rate configurations for the connection.
you can get the manual here http://catalog2.panasonic.com/webapp/wcs/stores/servlet/ModelDetail?storeId=11201&catalogId=13051&itemId=98050&catGroupId=15766&surfModel=TH-103PF9UK&displayTab=R
If you want me to e-mail you page 11 of the manual let me know.
I have done AMX programming quite a bit and page 11 has everything I would need to make your display work fully.