I want to print my photo in black and white how do i do that?

yes you can print in black and white by adjusting the setting in your printer

Sounds like your photo program in configured wrong, The printer will draw it's setting from the default printer for the program and if you have the photo program set up to print in black and white then this is what the printer is going to do. Check the settings in your photo management software and see what they are

More than likely what you want is a gray scale image and not a true Black and White image. If you tell the printer to print Black and White for a photo, you will lose all the gray shades available between the black and white bookends.

Normally, you can set the printer to print grayscale only from the driver properties page.

Don

Epson,. has it rigged, that you must have ink in all the cartridges.............! Doesnt make a difference, if you are printing black and white ONLY.

You have to replace them.

Good Luck......

Could this be the problem? From the User Guide: "Print Color images in Black and White -- Print your color images in black and white to save the ink in your color ink cartridge.
NOTE: You cannot select this setting if you have selected Color Cartridge for all Black Printing"

WHen your p;;rinter name comes up, check the printing p;references. You have "P:rint colors as black & white" checked. Un check it. It is in the printer dialog box, not PSP.

I had the same problem and just figured it out! On your control panel, choose printer and then Properties. Go to Printing Preferences and click on the Advanced tab. Under this tab is a button for More Options and then a section Complete-A-Print. I had to uncheck "use color cartridge for all black printing" and then check "use black cartridge to print in black and white." Then I had the option back to print in black and white. I have a Dell Photo 964 but I'm assuming the options should be the same. Hope this helps someone!

hallow ,,,if your lookin to just print black and white so .while printing ,go the printing properties or prefrencies ,,in the colour option click just use black and white

Known issue. Use QTR to print bw prints. Works great on my Epson 2200.
http://www.quadtonerip.com/html/QTRoverview.html

If you have a monochrome option, I would use that.
I'm guessing that your old black and white photo's (which I'm thinking you scanned in may have a sepia tinge which the printer is emphasizing, and if you only want black/white prints, no need to print with colour.