Try turning key to each mode and press subtotal then cash. If it errors, turn to next mode and try again.
SOURCE: Programming Casio TE-2400
Hi. Yes, it is state dependant. You could either check with other shopkeepers that you deal with to see what they have setup, or see what IRS department recommend. I'm only from little New Zealand on the other side of the world, but I have played with overseas tax, so i can probably help once you find out what tax settings you need.
Mark
SOURCE: I cannot change the price for an item on CASIO TE-2400 register
Hi. I'm afraid this is not a 'basic requirement' of a cash register. You are working with a very complicated area of cash registers that only the medium to high end machines can even do. If you are getting stuck already, then you will not be able to work out the more complex batch processing areas of scanning either.
Your dealer should have setup the majority of this for you before you left their store (especially the keyboard layout issue and keysheet for the keyboard), then you would normally receive extensive training if you are going to be making program changes yourself in future.
You will need to learn about the difference between flat PLUs and scanning PLUs, 'Not found PLUs' like you have run into so far, then deletion techniques, PLU status programming, manual entry using OBR method etc. The book is only a guide to what you should have learnt during training. You really need to go back to the dealer and get a training session. They should be able to sort out all of these problems for you. It will take a one on one demo to fully train the ins and outs of full scanning systems.
Mark
SOURCE: I have a problem with cash button on TE 2400 cash register.
Hi.
Try this:
Turn key to program mode.
0
CASH
SUBTOTAL
3
SUBTOTAL
0
CASH
SUBTOTAL
Mark
SOURCE: can't enter casio qt-2000 pgm mode
My qt-2000B register is frozen cannot press any button. Would anyone have the solution for it.
SOURCE: Hi, I have a few Casio TE-4500F cash registers,
Oh dear. Why are you wiping the IPL? You are seriously screwing up the firmware in the machine. It might be best to see a dealer to have them change IPLs for you
116ER, 117ER, CE2300, CE2350, CE2400, CE280, CE285, CE300, PCR202, PCR204, PCR308, PCR408, PCR350, PCR355, PCR360, PCR365, PCR450, PCR460
This will erase all information - Remove AA batteries and unplug register from wall for 15 minutes.*
If resetting does not work this indicates issue is repair level.
PCRT465, PCR465A, PCRT2000,
This will erase all information - with the PGM key at Off press and hold down the Feed button, while holding the Feed button turn the PGM key down to the PGM mode Release the Feed Button ----INI should appear or a group of 8 zeros
If resetting does not work this indicates issue is repair level.
PCRT470, PCRT480, PCRT48S, PCRT2100, PCRT220S
This will erase all information - with the PGM key at Off press and hold down the Feed (journal) button, while holding the Feed button turn the PGM key down to the PGM mode Release the Feed Button ----INI should appear or a group of 8 zeros, now press one of the below
22500 Subtotal (PCRT40, 480, 48S)
Or
23000 Subtotal (PCRT2100, 220S )
Wait for a receipt to print.
If resetting does not work this indicates issue is repair level.
730 views
Usually answered in minutes!
×