Question about Canon Office Equipment & Supplies
You didn't say whether you checked to see if it is plugged in at the back or if you checked power at the wall
Posted on Apr 28, 2017
Ok,Remove the papercover tray, if you look just above the paper tray you will see the scanner,close the scanner by pushing it upwards,and then your problem will be solved.
Posted on Mar 18, 2009
Hi flord, this error code on CANON, (E000) means that the Fusing unit not heating up, the mostly of cases this unit is damaged and need to be replaced.
you migth contact canon support to replace the fuser of the printer. maybe you have printer too many sheets.
Posted on Apr 07, 2010
You can the drivers from this site
Posted on Feb 23, 2008
Contact Sensor HP error, Failure in return
When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies.
(1) Check the connection of Flat Cable between Main Controller Board (J5) and Contact Sensor.
(2) Replace the Flat Cable between Main Controller Board (J5) and Contact Sensor.
(3) Replace the Contact Sensor.
(4) Replace the Main Controller Board.
Posted on Jan 27, 2015
Tips for a great answer:
Jun 10, 2016 | Canon Office Equipment & Supplies
Jan 27, 2015 | Canon I-Sensys Mf4410 All-In-One Laser...
Apr 07, 2010 | Canon i-SENSYS MF4660PL - 1827B021AA - -...
Apr 14, 2009 | Canon i-SENSYS MF4140 All-In-One Laser...
827 people viewed this question
Usually answered in minutes!