Bd512 universal remote control

You need to use the code search function of the remote, we do not have code listings here.

If the universal remote control do not select the auto-tune function, try an other set-up code said for your device. Do it for an other code and so on... This is a trial and error method, until you get a suitable set-up code to your device. This is true to any brand universal remote controls. Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/

the remote may not have the code needed built into it.

It likely does not have the code built into it that is needed.

Please check on the link below and see if they help to find one:

http://www.espares.co.uk/search/remote-controls/p/1090

http://www.usa.philips.com/c/remote-control/12532/cat/#/cp_tab1

Code for bush

Try downloading this manual

http://www.remotecentral.com/cgi-bin/files/dl.cgi?file=others/mitsubishi/bd512-manual.zip&area=other

i have a connect- it bd512 universal remote control i need a code to programme in to my tv it is a baier please help!!!!!!!!!!

The Konig IR9982 is not a universal remote control so there is no code to make it work your Bush TV. It is actually a direct replacement (electronic clone) remote for some Hitachi models.
You will need a direct replacement for your particular model, try http://www.remotesreplaced.co.uk/television/remote-control-bush.htm

Kjarrett,

The reason your universal remote won't control advanced functions is because it's not meant to. Universal remotes are intended to be a convenience and usually only control the basic funtions like channel, volume and mute. Sometimes a higher end will do some other things, but you will need to get an original remote for your brand and model of TV to do everything you want to do. Sorry I can't give you better news.

Hope this helps, and please rate my advice, good OR bad.

Good luck!