Question about Canon PIXMA MP160 All-In-One InkJet Printer

1 Answer

Canon mp160 empty cartridges

Whenever i try to use refill cartridges , color ink led & black ink led starts glowing.i tried stop reset idea but it is not working
how to reset chip inside cartridges so they will be identified as new cartridges

Posted by on

Ad

1 Answer

THERE IS NO WAY TO RESET THE CARTRIDGES"S CHIP SET TRY IGNORE IT.

Posted on Nov 26, 2007

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to reset my Canon Pixma MP160 manually.


Hi,

Follow the steps below to do Reset on your printer.

  • Turn on the printer to reset then run MPTool software
  • Click Reset Black on Ink counter to reset ink level black cartridge or click Reset Color to reset ink level on the color cartridge.
If this does not work, try the steps below


To reset waste ink counter at printers canon pixma MP150, MP160, MP170, MP180, MP450 and MP460 there any 2 choice, that is :
  • Start with printer on then run this software
  • Click Reset Main (main) to reset waste ink counter and then click Reset Platen button (additional)
mptool_screen.jpg

Dec 13, 2010 | Canon PIXMA MP160 All-In-One Printer

1 Answer

Error 5 canon mp160


The error 5 means that the printer cartridge has been "turned off." It is a tactic that Canon has employed to try to prevent refilling of their cartirdges. Basically the machine is constantly checking for signs of a non-original Canon cartridge and has found something to tip it off. We most commonly see this with the color cartridges not the black. The solution is to replace the faulty cartridge.

Feb 06, 2010 | Canon PIXMA MP160 All-In-One InkJet...

2 Answers

I refilled the color cartridge. The light that indicates lack of ink didn?t stop blinking. After a couple of prints, the second light for black ink also started blinking and now the printer doesn?t print...


You can try to press & hold the stop/reset button for 3-5 seconds.
If this still do not clear.
Again try to press & hold the stop/reset button for 3-5 seconds

If the stop/reset button does not work
You may try pressing the color button

Mar 01, 2009 | Canon PIXMA MP160 All-In-One InkJet...

2 Answers

How to reset ink cartridge for mp 160


First, download the software at http://www.box.net/shared/4yblbn34kg

Secondly, to run the software your printer has to be in service mode. Do that by
- unplug cable
- press and hold "power" button
- plug cable
- press "resume" and release
- release the "power" button
At this stage, your computer will detect a new hardware

Run the software.

Sep 05, 2008 | Canon PIXMA MP160 All-In-One InkJet...

11 Answers

Mp 145


How to reset the e27 for canon mp145 printer?

May 04, 2008 | Canon PIXMA MP150 All-In-One InkJet...

3 Answers

Error code E5


hi dear

hi dear

may the error code or how many blinking can solve your problem

this is the list of error code

How to clear Error Code Canon printers MP150 MP160
CANNON Printers MP150/MP160 ERROR CODE


E2-2 No paper (ASF)
E3-3 Paper jam
E4 No ink
E5-5 The ink cartridges are not installed or a non-supported ink cartridge is installed ,
or the ink cartridges are not installed properly
E8 Waste ink absorber full, or platen waste ink absorber
full

E9 The connected digital camera / video camera does not support Camera
Direct Printing
E14 The Ink cartridges whose destination are wrong
E15 Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 Failed to scan head alignment sheet
E22 Carriage error
E23 Paper feed error
E24 Purge unit error
E25 ASF(cam) sensor error
E26 Internal temperature rise error
E27 Waste ink absorber full or platen waste ink absorber full
E28 Ink cartridge temperature rise error -
E29 EEPROM error
E33 Paper feed position error
E35 15 USB Host VBUD overcurrent error - USB
E37 17 Abnormal motor driver error
E40 20 Other hardware error
E42 22 Scanner error





try this methode

Methode 1

1) With the printer powered off but connected to a power source, press the Power button while pressing and holding
the Stop/ Reset button.
2) When the Power LED is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a
service mode. (Waiting formenu selection)
4) When the LED lights in green, press the Stop/Reset button the specified number of time(s) according to the
function listed in the table below.(Each time the Stop/Reset button is pressed, the LED
lights alternately in
orange and green, starting with orange.)
The number of the Reset
button pressing
LED Function Remarks

0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset See waste ink counter reset
procedures below.
5 times Orange Destination setting See Destination setting
procedures below.
6 times Green Print head deep cleaning
11 times Orange Button / LCD checking
12 or more times Returns to a menu selection


that's all


maybe it can fix your problem



thanks


cropp


Mar 27, 2008 | Canon PIXMA MP160 All-In-One InkJet...

1 Answer

Canon MP160 Errors 1 5


I think you will find that it is the ALARM light that is flashing, is that correct?

If it is just push the O.K. button to except that the cartridge is not the original or has been filled after you got the meassage that the cartridge was empty.

Also it will show that the ink levels are unknown in both cartridges but thats O.K. it will print fine.

Mar 07, 2008 | Canon PIXMA MP160 All-In-One InkJet...

5 Answers

Ink level counter disabled, not recognizing new (refilled) cartridge.


hi,
CANON PIXMA MP160 All-In-One InkJet Printer
has few common problems. Such as Driver CD lost, Scanner does not work, Connection problem etc. For find all these software solution just click here....
75aba9d.jpg3f22050.jpg

http://www.canon.com/printer/prob676ijt65/solution

prito-i-24

Jan 09, 2008 | Canon PIXMA MP160 All-In-One InkJet...

5 Answers

How to Override Ink Level Gauge When Using Refilled Cartridges


hi,
CANON PIXMA MP160 All-In-One InkJet Printer
has few common problems. Such as Driver CD lost, Scanner does not work, Connection problem etc. For find all these software solution just click here....
75aba9d.jpg3f22050.jpg

http://www.canon.com/printer/prob676ijt65/solution
604

Oct 08, 2007 | Canon PIXMA MP160 All-In-One InkJet...

2 Answers

Canon pixma mp160


Go to www.fixyourownprinter.com

Jul 04, 2007 | Canon PIXMA MP160 All-In-One Printer

Not finding what you are looking for?
Canon PIXMA  MP160 All-In-One InkJet Printer Logo

290 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2279 Answers

Ekse

Level 3 Expert

13434 Answers

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...