My calls will get dead /cut off once in every 10 calls averagely N95
When calling someone my phone will have no ringing tone .
will have to call up a second time and actually the other party had already answered my previous call but for my side i thought i did not get through. this happened quite ofthe and my line was cut off before i could finish my conversation.
An expert who has achieved level 2 by getting 100 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert whose answer got voted for 100 times.
Re: my calls will get dead /cut off once in every 10...
Try to reset the phone,sometimes it works!
or use this reset code (*#7780#)
if it does'nt work try it manually go
to menu, settings etc..... :-)
or if still thesame
try this full reset code...
but backup everything first
it will restore everything....
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Step by step information at the link below. Brother Fax T96 The F/T
Mode is used to allow the fax machine and the telephones to share the
same telephone line. When a call comes in, the fax machine and all
extension telephones on that line will ring according to the number of
rings you have set for the Ring Delay.
When the Ring Delay is completed, the fax machine will answer the call
and determine if it is a fax call or a telephone (voice) call.
The fax machine can determine this by the signal it is receiving on the
telephone line. If someone is sending a fax automatically , the sending
fax machine will transmit a fax tone (a series of beeps every 3
If your fax machine hears these tones, it will receive the fax.
If the fax machine does not hear any fax tones, it assumes it is a
telephone (voice) call and will begin ringing the F/T ring tones (double
ring) for the length of time you selected for the F/T Ring Time. These
tones will only ring on the fax machine's handset (extension or external
phones will not ring). At the end of the F/T ring time the fax machine
will go into the receive mode in order to receive a manual fax.
(If the call was a voice call and was not answered, the caller will hear the fax receive tones also).
If you answer the call before the fax machine(during the ring delay
period) and determine it is a fax, you can transfer the fax to the fax
machine for receiving.
If you answer the call on an "extension" phone and hear a beep every 3 seconds (automatic fax) or silence (manual fax), press *51 or *91
for New Zealand (remote activation code) on the telephone keypad, wait
to hear the fax machine turn on (chirping sounds) and then hang up.
If you answer on the handset of the fax machine and hear a beep every 3 seconds or silence, press the FaxStart or Start/Copy key on the control panel of the fax machine and then hang up the handset.
If you answer a call on an "extension" phone during the F/T Ring Time, you will hear the F/T ring tones.
To release the call from the fax machine, press #51 or #91 for New Zealand (remote deactivation code) on the telephone keypad and you can speak to the calling party.
If you pick up the handset of the fax machine during the F/T ring time, you may talk to the calling party immediately.
Unclear if you're using the TMobile ring tones or some that you have downloaded (or created). BION, I got longer ring times by using longer ring tone recordings. (I got mine from free sites on the net, most tones created by people from their music collections.) If you are using ring tones that aren't from T-Mobile, switch to a TM ring tone and see if that makes a difference. (If it does, then shop around for some new ring tones - the old ones were causing a problem.)
Another possibility is to check settings/phone/auto answer. Be sure this is set to "never." Also check Call Barring. Try having your blocking of incoming calls "off."
And last: put profile on "vibrate" and call yourself. Do you get more than one second of vibration? If you don't, then it's probably a phone malfunction, but if you do, it's a ring tone problem. Fairly easy to deal with. Good luck!
Your system has been programed by your alarm company for remote programing by their techical department. They can access your system to change codes, reset your system's time/date and do remote diagnostics. Most security system manufacturers allow this remote access by having the security system answer the telephone after so many rings, the security system then picks up and waits for a frequency tone from the security dealer's computer. Once this occurs the dealer can access your system. Your dealer may have to change the program settings if this is causing interference. A second possibility is do you have remote access to your system? Some systems have the ability for the home owner to remotely access their system from any outside telephone. This allows the customer to arm/disarm their system while away from home. This could be causing your problem.
This is the time that love cannot help with. Buy yourself a new home phone where the massages will pile up. erase all massages on your mobile phone. It is time to buy a cell phone which will record all masseges that you've received.
I don't know your country code or vmail quickdial number but try this using those numbers where I say.
Oh firstly if your fone is a prepaid you may need to ring your provider and ask them to extend the ring time.if not this might work
Pls let me know if it does.
** (country code) * (vmail number)**30# and press call this should extend the ring tone to 30 secs.
remember country code & vmail number have to be actual numbers dont try to type in the words and brackets