- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
This is a common problem, your drive is in what is known as safe mode or kernel mode, what has happened is some modules of the firmware have failed to load and so it is now only detecting the logic board. I'm afraid there won't be much you can do without the special software to read the firmware aspect of the drive, you need to load what is known as a loader which contains the code to boot the heard drive up so we can write to the firmware (the firmware is stored on the platters) so really your only option is to send it off to a data recovery company who have all the gear like Digital Recovery
There is a jumper located near the power plug and on the label there should be a configuration table. Primary, slave or cable select. Double check to see the data ribon cable type the newer ones 7600 RPM I believe has a dense wire ribon texture for faster data transfer, I did not believe it when I first saw it eather.. I believe that may have to use the older standard ribon data cable. And check the config of that jumper
Unless you are willing to shell out far more then you already have no. The only other method is that used by large companies that need to recover data from servers etc. And to say it's expensive is a massive understatement.
The only thing you will take away is the knowledge that a backup of anything should not be kept on the same drive.
you are not likely get parts for a hard drive.
You simply replace them.
If you have data to remove then there is a plethora of software to down load.[ PCIspector/BadCopy Pro to name but 2]
You could also put it into the freezer overnight and try running it before it warms up.
Hi theres a couple of ways i can think of,
1st, buy a replacement board but needs to be the same model and just replace it. you might get a cheap one from ebay.
2nd, if you phone maxtor and tell them u have a faulty hard drive, with important files they ask you to send it to them and they give you a price to get the information off, i cant remember how much it was the last time but its possible.
all the best, and gl retrieving the info..
John
×