Brookstone Thera Spa 'Percussion' massager has 2 massage nodes. Grey cap on one is completely broken off. Can this part be replaced?

Question edited for clarity and add maker.

Please don't type in all CAPS, it is considered SHOUTING and is harder to read.

Did you try the maker?

https://www.manualslib.com/manual/869708/Brookstone-Active-Sport-Massager.html?page=12#manual

Or you can get them 3D printed. Or you could use 'Plastidip' on the head.

"Thera Spa" Replacement Cup by AngryPancreus

Thingiverse https://www.thingiverse.com > thing:1225706
Download files and build them with your 3D printer, laser cutter, or CNC. Thingiverse is a universe of things.

https://www.google.com/search?q=THERA+SPA+MASSAGER+parts

....

i am looking for a cordless charger for MAX 2 Dual-Node Percussion. if any one has please let me know i will buy from them. or let me know where I can buy them.

See this video please.

HELLO MEAD

I had a Theraspa cordless turbo massager that eventually stopped working but I kept the charger. It still works because I've used it for my replacement massager.

If you're still interested, would $10 be reasonable (plus shipping cost)?
I have an e-bay account and I can sell it to you through there if you want.

Let me know if/how you'd like to proceed.

JK

Hi, I fixed mine with a zip tie. You pull off the grey rubber sleeve covering the 2 massage nodes (the part that moves.) There are 4 long screws holding on a plastic cover (the massage nodes.) Take them out. If it's not vibrating - check if the rubber grommet link between the motor and the note assembly has torn apart into 2 pieces.. thus severing the link between the motor and the nodes.. (it will make a rattling sound - but will not massage if this is the case..)

If this is the problem.. remove the two pieces of the torn rubber connector.. there are screw posts at each end - with rubber in the middle.. remove these posts. Thread a Zip Tie between inside the holes that the posts thread into. This will re-connect the motor to the node assembly. Test. If the Nodes are now massaging to your satisfaction - reassemble.

This fixed my unit - at least until a time that I can find the rubber post / grommet assembly..

The unit works fine. Good Luck!

I need one - do you still have it?

The Manual says the heads are color coded:
Black = Soft Massage
Medium Grey = Medium Hard Massage
Light Grey = Hard Massage
Red = Heat Massage

I have a similar Brookstone model, cordless with heat and cold options. I gave up finding the cord and purchased a dual model charger from Amazon that allows me to chose the voltage of the charge to the item. It appears to be working find now. I did have to play with the input voltage until I found the correct amount in spite of what the charger said. The unit I bought is a Hosa Technology power charger. Number ACD-377. Hope this helps you too.

My Max 2 dual node just went bad. Mine is a model BST-007. All the electronics worked, but no movement of the thumpers. I opened up the unit and found the problem was a connecting rod between the rotating part and the oscillating part. Its a piece of rubber with 2 threaded rods coming out of each end. The rubber simply broke. I found the EXACT part at Ace hardware for $5.00. It was an easy fix!

I don't have the Homedics programmable, but I have taken apart my Brookstone programmable (and lots of old Homedics massagers).

I'm going to guess the screws concealment method is similar. On the under side of the massager, look for small oval-shaped outlines that are the same color as the rest of the body. Mine had four. These are little plastic plugs that you can pry out with a tiny flat screwdriver or a razor blade. The screws are hidden under these plastic plugs.

I hope this helps