Bluetooth for sciphone

pair phone to computer with blue tooth.
Look at picture on phone - should be a share option
select share via blue tooth and send to p.c
On P.C you need to click on blue tooth icon and when asked say yes to receiving files from phone.
Look at where files are received probably in download folder
on P.C.

hi i think u might have directly copied the games to ur phone's memory card via data cable doing so may result in the phone saying unsupported files but since ur phone is java supported and the games will work for sure u can install the games via bluetooth enabled laptop or even u can use a bluetooth dongle to install the games in ur mobile.To install the games in ur mobile via the dongle follow these steps:-
1.first plug in the bluetooth dongle in ur system and ur PC will detect it,as soon as it detects the device go to the START menu PROGRAMS ->ACCESSORIES->COMMUNICATIONS->BLUETOOTH TRANSFER WIZARD and click on the ur system bluetooth wizard
2.switch on ur mobile bluetooth and search for any paired device u will receive a prompt message as soon as ur system detects the mobile and will ask u to enter the password type the same password which the system will generate and ur mobile will be paired u can then select a game file and send it in ur mobile from the PC via the dongle as soon as the file is copied u will receive a message in the mobile to install it type yes and there u go the game will be installed.
u can also try using another phone switch on the bluetooth device of the other phone and copy the file in the targeted phone via the bluetooth .was this useful to u if yes pls do rate my solution and u can also send ur views via the testimonials thanx fr visiting fixya
with warm regards - bonefirediv.

search for 320x240 java games.When you found a site,navigate to .jar file and follow the instructions to download that file.after downloading the .jar file into pc,move it to the phone using bluetooth(simply send it via bluetooth).Then u'll be asked to install the application

you have to configure you Bluetooth. Bluetooth are by default high security and therefore it ask you if you want to receive data trough you bluetooth. you should have the possibility to chance these settings to just receive, when you are connected.
Hope that will answer your question.
Have a nice time over there
Please rate my answer

Do you have a data cable? con you connect to the PC? If yes then down load to your PC all the SW for your phone you want from www.getjar.com. To include google maps. Transfer them to the phone either vis the USB data cable or via BT. Use the file manager of the phone to locate and run the files that you just transferred to your phone and one by one install them. As regards the GPRS connection, you must contact the helpline of your service provider and ask specifically for IP address, Proxy port setting (enabled or dosabled), Proxy port Number and the APN. All these can only be provided by the service provider as they all have their own.

Your phone might not support blue tooth file transfer. Call your service provider and ask, they should be able to tell you. Also the file you are trying to receive/send might be to big

1. Save any work open and close all programs.
   
   
   
2. Browse to support.dell.com.
   
   
   
3. Click I'm looking for drivers and downloads .
   
   
   
4. Under Choose by Service Tag click Enter a Tag , then type in the computer's Service Tag number, click Go in the green oval .
   
   
   • When the default values are not correct, click the to the right of Operating System or Driver Language and select the desired value.
     
     
   
   
5. Click the to the right of Category, then click Network in the list of categories that appears.
   
   
   
6. Click Download Now to the right of Wireless Internal Bluetooth® Module.
   
   
   
7. In the File Download - Security Warning window, click Save.
   
   
   • Write down the filename, it will be needed later.
   
   
   
8. Click Desktop on the left under the navigation bar of the Save As window, then click Save.
   
   
   • It may be necessary to click Browse Folders to expand the list of options.
   
   
   
9. In the Download Complete window, click Close.
   
   
   
10. Click the Start button.
    
    
    
11. Click the arrow to the right of the lock icon.
    
    
    
12. Select Shut down.
    
    
    
13. Wait 10 seconds after the computer shuts down, then press the <Power> button.
    
    
    
14. Once the computer has reached the Desktop, double-click the file previously downloaded.
    
    
    • The Open File - Security Warning window may appear. If so, click Run.
      
      
    • The User Account Control window may appear. If so, click Allow or Continue.
    
    
    
15. In the Network: window, click Continue.
    
    
    
16. In the Select the folder where you want to unzip the files to window, click OK.
    
    
    
17. In the Folder does not exist. Do you want to create it? window, click YES.
    
    
    • When the message appears asking to overwrite the folder, click Yes to All.
    
    
    
18. In the All files were successfully unzipped window, click OK.
    The Preparing to Install the Vista Bluetooth Profile Pack screen appears and closes.
    
    
    
19. In the Vista Profile Pack Bluetooth InstallShield Wizard Welcome window, click Next.
    
    
    
20. In the Ready to Install the Bluetooth Profile Pack window, click Install.
    The Installing the Vista Bluetooth Profile Pack screen appears and closes.
    
    
    
21. In the One Click Download Firmware Upgrade window, click OK.
    
    
    • A message to plug the computer in to A/C power may appear. If so, provide the computer with A/C power before proceeding.
    
    The Dell Bluetooth module's firmware is updated and the installation of the Vista Bluetooth Profile Pack continues.
    
    
22. In the Vista Bluetooth Profile Pack InstallShield Wizard Completed window, click Finish.
    
    
    
23. In the Vista Profile Pack Installer Information window, click Yes.
    The computer restarts.

this would work for dell 1525 with vista and xp please note that the perihepral device is nothing but the device which you are connecting, will have its own device please check you must have a driver in the manual or it would already be installed in device as soon as you connect it should work after this steps