Need schematic for pro 2009 scanner - Radio Communications

or a sensor -water pump-air bound-harness --gasket--[if know fan[s] not working need to diagnose system with a meter --pro grade scanner --or send out to a shop

Question edited for clarity, maker.
Question moved to category.

Also click on the images tab.

https://www.google.com/search?q=2009+Chrysler+Sebring+convertible+top+wiring+schematic

..

I'm trying to program a Realistic Pro. 2009 and every time I hit program then the frequency and push enter it just keeps saying error can any body help me with this problem???

• If you go to this link http://support.radioshack.com/support_electronics/16761.htm and then click on "operation" this is their online manual.

• Hope this helps.

Regards, Tony

• For the Pro-2009 you can go here http://support.radioshack.com/support_electronics/16761.htm and click on "operation" which has the manual/operating instructions.

• If you have any comments please feel free to leave them here.
• Hope this helps and thank you for using FixYa.

Regards, Tony

The old model scanner came with an old ISA SCSI plug-in card. Even if you had the card, it will not fit into ANY of the card slots on today's motherboards. That card could inly be inserted into a a motherboad from the pre-pentium days - like a motherboard with a 80286 processor. If you ae using a diffrent SCSI controller card I doubt if it will work with this old scaner. FYI, service manuals do not contain schematic diagams and would not cotain the info you need to get that scanner to work with a different scci controller. Sorry, but the 4p is just too old.

If you have any additional questions contact me by clicking on the "Add a comment" link located under your problem description on FixYa. Also, if you believe that this information was helpful to you, please rate my solution using FixYa's "Solution Helpful" rating scale.
Best regards,
Yavacotech

Hello, here is the schematics to your Toshiba.
Pro 4200
Hope this helps!

Look on the chip and see if you can read the number on it,then go to NEC Crossreferance and type it in ...thats the part you need,,install it just like that one is soldered. hope this helps...

Hi, Always happy to help a fellow NASACR fan! Try this link for frequencies.

scannerbytes.com/2009-sprint-cup-scanner-frequencies/

I was just reading an article on this, and R.S. does not sell or give away schematics for their units. Word on the street is , keep your eye on ebay for a service manual. Here's a link to the article,,, just don't shoot the messenger.
http://www.nf2g.com/scannist/rs_manuals.html

Good luck with it,, Mechanic