Question about Sony Playstation 3 (PS3) Console

Open Question

My ps3 stoped working on sceptra x46 I put ps3 on another tv and it works fine. so i tested the tv by hooking up attenna and it is working. I also changed the HDMI cord.

Posted by Ronni Echols on

Ad

5 Related Answers

Anonymous

  • 11 Answers

SOURCE: Playstation 3 - No output to T.V

This is not a guarantee but try the following:

  • Make sure the system is off.
  • Hold down the Power Button for 5-6 seconds - until you hear the second beep.
  • Your video settings are reset and you should be able to choose your input and configure it from there.

Posted on Jun 14, 2008

Ad

Anonymous

  • 1 Answer

SOURCE: PS3 not working through HDMI cable

connect PS3 to TV select HDMI channel on TV press AND HOLD power button on PS3 until screen resolution selection page appears.
PS3 should now work.
had this problem, this solved it.
typical repairman looking for work :)

Posted on Jun 29, 2008

Ad

Anonymous

  • 327 Answers

SOURCE: My PS3 recognizes the HDMI input, but when I attempt to change the settings, it won't work

welcome to fixya

you have to set it up on the ps3 for the cable

i had the same problem on the ps3 in settings there is hdmi cable set up make sure there set to hdmi and not to av wire

Posted on Aug 01, 2008

Anonymous

  • 1 Answer

SOURCE: PS3 not working thru HDMI cable

i am having the same problem, so i called the mfg. of the tv and they told me to set the PlayStation to out put 1080i and not 1080p i don't think this is possible. my tv is a Hitachi and they are sending me an update card for the tv, hopefully this will fix the problem. Apparently its a problem with the tv not being able to receive a 1080p signal

Posted on Oct 31, 2009

Anonymous

  • 149 Answers

SOURCE: PS3 wont work with AJAX after using HDMI cable

ps3 does not reset the video automaticly you have to reset it yourself any time you go from one mode to the other

to do the vid reset just hold the power button when in standby(red light) untill you hear second beep then release

Posted on Nov 05, 2009

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer
0helpful
1answer

Dynex HDTV says not supported when PS3 is connected via HDMI

Have you tried changing the video output settings on the PS3? It may just be on a setting that the TV does not support. For instance, if the poutput setting is 1080P, and the TV only supports up to 1080i, you would get a "not supported" signal. Hook the ps3 to a tv that it works on...turn it on, go to settings- display settings-output settings- select HDMI as the connector type- if it asks for 3D tv size...select the size- now you need to set the resolution...select all resolutions that the TV supports, since it is a dynex...it is likely a 720p TV. So I would start by selecting only 720p, and then hook the system to the Dynex TV and see if it works now. If it works, you can go back in and attempt to select 1080i or 1080p to see if they work... but again, being a Dynex, it is probably only a 720p TV... The PS3 is likely trying to output a 1080i or 1080p signal...which that TV doesn't support.
37helpful
2answers

Dish network remote control code for sceptre television

Hi, my name is Cheri Torres and I am with DISH Network Internet Response Team. I came across your post and wanted to see if I could help. I will list here for you the best codes for addressing a DISH remote to a Sceptre TV. I will also list the instructions for addressing your remote to your TV. I hope you find this information useful and if you have any further questions or concerns please feel free to ask.

Remote codes for Sceptre - 500 and 677.

Instructions for addressing the remote to the TV
1. Press and hold down the TV button until all the mode button light up red.
2. Enter the 3 digit code for your TV in the remote keypad.
3. Press the pound(#) button once.
4. Test the functionality of your TV.
0helpful
1answer
3helpful
1answer

Cascading white craziness

First thing you should try is using the regular old AV cables. That way we know if it's an hdmi problem or a video problem with the PS3. Hook them up, do the manual video reset ( hold down the power button until you hear a second beep, quickly release) and then post back here with the results.
1helpful
2answers
1helpful
1answer

PS3 Works on HD TV without Sound, no sound or display on a reg TV

when u connect ps3 to your tv turn on main switch now red led will come on press and hold touch button ps3 will come on keep your finger on the button and ps3 will turn off again factory settings are now reloaded this will work because i often change from standard v to hd tv
0helpful
1answer

Denon avr-1907 sound from TV stopped working

Help with hooking PS3 to a Denon Receiver. It worked before, but I had to move everything to a different location and when I hooked it back up the PS3 has sound but no picture. I have it hooked directly to the receiver with and HDMI cable (the receiver is hooked up to our cable box which is directly hooked to the tv via HDMI cable).
Not finding what you are looking for?
Sony Playstation 3 (PS3) Console Logo

Related Topics:

194 views

Ask a Question

Usually answered in minutes!

Top Sony Video Game Consoles & Games Experts

Ekse

Level 3 Expert

13435 Answers

Oloyede Monsuru

Level 3 Expert

1468 Answers

Daniel Dollive
Daniel Dollive

Level 3 Expert

315 Answers

Are you a Sony Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...