My aiwa cc-na92 keep flashing demo on and off. But wont do nothing else. What can I do to fix the problem?

For NSX 990 mini compo, power on with 'set' + 'demo' buttons simultaneously pressed worked! Thanks #minijaguar19

It appears you have an issue with the CPU IC that controls the features, its most likely not repairable

are you sure it's not going into demo mode after you turn it off? Is there just lights and display flashing? - that is demo mode. Probably a button on the remote to turn it off.

it sounds to me like you may have a bad switch. sometimes if you get a switch that does not open all of the way, it sends a message to the microprocessor and locks it up. when this happens, the switch needs to be replaced.

Go in to menu and turn off the demo mode

its because of data memory corrupt.. u might need to flast your memory of ur cd player

i have the same problem as you if you find the answer can you e-mail it to me plz. [email protected]

There should be a "Demo" button. push it and it should turn off for good. (until the power goes out)

use the power off button

I HAVE SAME PROBLEM. AFTER I REPLACED MY DEAD BATTERY MY AIWA CDC-X304 IS STUCK IN THE DEMO MODE. ONLY CD WORKS BUT ALL BUTTONS ON FACING DO NOT RESPOND. ANY SUGGESTIONS HOW TO RESET.