How do i take apart the canon imageclass d680 to clear the jam

Hi, please get new driver here: www.driversdown.com/
www.nodevice.com/driver/company/Canon/Printer.html
www.usa.canon.com/cusa/office/products/.../hs_1200ts

Jay kbxlz

http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=335&modelid=8152
No Mac drivers availible for imageclass D680, according to this Canon site. Only lists Windows ME, 98, NT, 2000, XP, or Vista.

hi try to download these manuals for ur printer go to this link and download them
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=239&modelid=8152#DownloadDetailAct

Ni there is something ( a small piece of paper) over the sensor in doc feeder- have a close look with a torch

Here's the definitive reset. It will work on the following models: ImageRunner 1200/1300, PC1060/1061/1080F, ImageClass D620/D660/D661/D680/D681
Press Additional Functions key
Press #
Press > to #7 Printer Function
Press Set
Press > to #4 Printer Reset
Press Set
Press <
Unplug printer and repower it.

Are you looking for the drivers or what?

Here's the definitive reset. It will work on the following models: ImageRunner 1200/1300, PC1060/1061/1080F, ImageClass D620/D660/D661/D680/D681
Press Additional Functions key
Press #
Press > to #7 Printer Function
Press Set
Press > to #4 Printer Reset
Press Set
Press <
Unplug printer and repower it.

try this web http://driverscollection.com/?H=imageCLASS%20D660/680&By=Canon&SS=Windows%20XP

need to replace pickup rollers, you might want to replace all of them.

you have to move whole scanner it to the left Lift the platen unit lever (1) and slide the platen unit (2) until the mark appears.
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=SupportDetailTabAct&fcategoryid=239&modelid=8152

then faq >>> select the install tuner