How do I reset the remote to my element electronics ELCHW261 tv. It won't work anything on my television

SOURCE: Element Electronics FLX2211B 22 in. LCD TV will reset every time

I have run into the same problem with a different model (32 inch from Circuit City). You may have found that there is almost no support from the co or web. I do not have an official solution but have some work arounds that have done the job for me.
WA#1 = after a channel scan tune to a HD/digital channel before you turn the set off. You need to do this each time for several times, because the set when turned on to a regular cable or analog station will default to skip all channels. After several times the set should remember your channels.
WA#2 = after a channel scan, go to the skip channel section of the menu, and if your remote has the colored buttons on the bottom scroll through the channels using the red and green (up and down on this menu) buttons. This apparently helps the set remember not to skip your scanned channels.
These are not glamorous solutions but appear to trick the TV into not re-setting the skip function for the channels.
Best of luck.

SOURCE: Element flx-3210 lcd tv

I have the same problem connecting from my computer

SOURCE: I need a Remote foe a 26" Element TV

I have a brand new one....give me an offer on it
[email protected]

SOURCE: Electronic eye seems tohave quit working.

So if your remote is working but the tv sensor is not, you could possibly unplug it and take off the casing and resolder the connection to the board :) I would examine the sensors connections to the video board and also around for any capacitors or any components that can be tested with a multimeter on Ohms. I'm no expert and have fixed flybacks, transistors, capacitors, opticals... sometimes it just needs resolder. sometimes the copper tracing gets fried off the board and shorted out because of dust. this happened inside my computer on two USB ports. TVs are also dusty especially around the externals.

SOURCE: dish remote

cathyw43

I have provided instructions on how to program your DISH remote to your TV. I have also provided a link with the codes for TV manufacturers. I hope this helps.

Program remote, step 6:
http://tech.dishnetwork.com/departmental_content/techportal/content/tech/remotes/TechRemo5.3Code.shtml
Ray Calo
DISH Network