Question about Connex Radio Communications
to cut down on noise i would hook it directly to the battery. make sure there is a fuse in the power cord first.
Please rate this solution thanks
Posted on Feb 23, 2009
These radios are know as what's called 'export' radios. They are imported under the auspices of being a 10 Meter Amateur radio and then through a typically easy modification are made to allow the selection of US CB channels. usually the modification involves plugging in a loose connector inside the radio radio chassis and/or removing a jumper wire soldered to a circuit board. If there is a nearby CB Shop they will usually do this for a modest fee.
Keep in mind that a radio needs to be Type Accepted by the FCC to be legal to use on the CB band in the US and export radios typically are not. Be sure to check the rear label for an FCC ID number.
Posted on Feb 12, 2010
Testimonial: "Thank you so much for the feedback. "
SOURCE: how to convert a connex
That needs to be done by someone that knows how, theres soldering involved. most cb shops will do it for $free-$10.00... Don't pay any more than that.. there are no parts nor is it hard so they shouldn't charge much.
Posted on Mar 01, 2011
Tips for a great answer:
Jun 13, 2015 | Connex Radio Communications
Nov 09, 2013 | Connex Multicolored Lights 3400 Hp 3400hp...
May 13, 2012 | Connex CX-3400hp AM/FM 10 Meter Amateur...
Jan 12, 2012 | Connex Radio Communications
Feb 12, 2011 | Connex 3300 240-Channels Base CB Radio
Mar 09, 2010 | Connex 3300 240-Channels Base CB Radio
262 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: