I need to know how to program my new uniden bear at scanner XLT

this is a link for your user/owner manual
http://www.pdfsmanualsread.com/uniden-bearcat-855-xlt-scanner-manual.pdf

Uniden BearCat BC 855XLT Operating Manual Page 9

It used to be that you could reset a Uniden scanner by holding down the #2 and #9 buttons while turning on the radio - that MIGHT do a factory reset for you. Let me know.

the Bearcat uniden 144-xlt and the Uniden Bearcat 145=xlt are the same scanner, the only thing it the case on them are different so they could sell new scanners eachyear. Those manuals will work for the bearcat 147-xlt, hope this helps some people out there

http://www.uniden.com/content/ebiz/uniden/resources/ownersmanuals/BC200XLTom.pdf

if its the xlt here ya go http://www.uniden.com/pdf/BC895XLTom.pdf

The best programming instructions are in the factory manual that you can download and print, at no cost, here:

http://www.uniden.com/pdf/BCT7om.pdf

Bill B.
Listening in since the 60's

To RESET your scanner:
- Power it OFF
- Press and hold the 2, 9, and MANUAL keys and power the scanner ON

This procedure will erase all programmed frequencies and return the scanner to its original factory settings.

Bill B.
Listening in since the 60's

My Uniden Bearcat BC 147 XLT will not broadcast. I have unplugged and reset it and installed new codes but, still nothing. What can I do?

Although you didn't specify a model, your problem is listed in the BC95XLT section, so here is a link to the manual for that scanner. It's a pdf file that you can download/print for future reference.

http://uniden.com/pdf/BC95XLTom.pdf

If this is not the correct model you can find manuals for most recent Uniden scanners on the same site.