220 bayou well fire but won't start - kawasaki 2005 Bayou 250

call a dealership and have them cross reference the part numbers to see if they are the same

google your model for schematics and locations of parts.

Did you check the frame rail by your left toe? it may have been painted over.

the solenoid has gone bad most likely. if that checks ok, could be the keyswitch, kill switch or neutral safety switch.

a large hammer and lots of effort. if the center has come out you can cut the outer ring with a dremel cutting disc.

make sure coil is good and all safety switches are working

well it tells me that the starter is good and you may need a new relay or it may just be the fuse!! Not sure on that model if that is the only fuse or not, on my 300 bayou there is a fuse at the battery and it could be blown as well. The manual will tell you ALL about the machine and give you troubleshooting tips!!

http://www.mediafire.com/download/j8p6ew6gty8cd44/2003-05+Bayou+250+Service+Manual.pdf#2 for a newer 250 but I think they're all the same

then the carburetor jets are cloged up. take it apart and do a good cleaning on it.

What type of fluid do you have in there? in some cases we have put synthetic or oils with additives and it has caused the plates to slip.