Can you tell me how to change the clock on my RS2652?

Press the clock button once. Hour number flashes. Use the tuning button to adjust the hour. Press clock button again and use tuning button again to set the minutes. There is a program /preset button below the tuning button, use that button to set, make time stay.

If your clock radio is more than two years years old it will be operating on the old changeover schedule, and there's no way that you can change the schedule. What you can do though, is turn the DST switch (if so equipped) to the OFF position and change the time manually. If yours is an "atomic" clock you can force the change by setting the clock to a different time zone. (I have an atomic clock that's set up on the old schedule. DST is OFF, and I change the zone between the Central and Eastern time zones.)

Bill B

press and hold the clock button until the hour bilnks, release clock button, use the tuning buttons to set the hour. then press clock button once, use the tuning buttons to set the minutes, then press the set button once.

to change the clock...press the menu button for a few seconds...then you will see ADJUST CLOCK..use the arrows to changs clock..

Go to www.rca.com they have site that if the manuel is available you can download the manuel. If not google the model # with the phrase owners manuel you might find other sites that have it for free . Good luck

as im seeming to tell every1..lol (make/model plz)

I would say it's the main power supply. Try looking for a short in there using a multimeter

In addition to what i said in the live chat about the transformer, here is a link to the manual for the RS2653 which seems very similar; http://www.rcaaudiovideo.com/rcaav06/AudioVideo/ProductDownloads/RS2653_IB.pdf or this link to contact RCA directly; http://www.rcaaudiovideo.com/en-US/ContactUs.html Hope this helps, not much in the manual of any use for this problem :)

you can use wood glue and glue it back together thats what i did with mine and i havent had a problem since