I want hp laserjet p2055d printer mirror printing solution

https://h30434.www3.hp.com/t5/LaserJet-Printing/Won-t-print-error-msg-about-the-output-bin-is-full/td-p/6208665

https://support.hp.com/au-en/document/c01948565

https://www.technibble.com/forums/threads/output-bin-is-full-hp-laserjet-p2055d-printer-error-message.17914/

I had the same problem. Try adjusting the setting to fit on one page (did not work for me on my hp but worked on my brother MFC) or remove the device and reinstall with updated drivers

supply memory located on cartridge., replace it if available or else replace cartridge

does this happen in all jobs or just certain jobs.Try printing a config page by going to reports and config page, enter.

why i can't print power point slide in laserjet P2055d?

Probably a bad ink cartridge. Remove the cartridge and clean the face of it with alcohol to remove dried or clotted ink.

Dave W.

Try Using the HP Print Diagnostic Utility in Windows - HP Customer Care (United States - English)

how can mirror print on HP laserjet p2055d

Hi,
it sounds like your printer cannot translate the the graphics being sent from your computer.
It may be that one of your printer settings is not set correctly.
Or, it may be as simple a solution as updating your driver for your printer.
Try here for a driver for Laserjet P2055D:

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=3662055&taskId=135&prodTypeId=18972&prodSeriesId=3662052&lang=en&cc=us

If this is not your model, search for your specific model on this HP website.
Note there are also firmware upgrades for the P2055D printer.
Cheers,
Steve

There is output sensor where the papers come out, make sure its lowered down, be VERY CAREFUL not to break it.