Does anyone know what to do if the pressing the select button only gives you the demo option but not the time?Does anyone know what to do if the pressing the select button only gives you the demo option but not the time?
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
you stop being lazy and open your manual or google seach or the pdf manual if you dont have it anymore like seriouslly man the time you spend finding this site and whining about a fake problem and waiting for a answer you could set 100 different clocks probally built your own.
Do not cut the wires from the car. Instead, call Crutchfield at 888-955-6000 and order the adapter part number 120701003. When you call them, ask for color coding. For JVC, refer to the attached picture. Match the adapter color code with that of JVC. If the adapter color code is the same, then connect ground (black), battery (yellow), and wire from ignition switch (red) securely. Turn on the car and see the radio works. If it works, connect one by one speakers and confirm. Remember, perfect connection gives reliable installation.
Press and
hold SEL until menu appears Using the
scan button (FWD/REV), select Clock H Using the
volume knob, set the value Using the
scan button (FWD/REV), select Clock M Using the
volume knob, set the value Press SEL to save and exit
Press and
hold SEL until menu appears Using the
scan button (FWD/REV), select Clock H Using the
volume knob, set the value Using the
scan button (FWD/REV), select Clock M Using the
volume knob, set the value Press SEL to save and exit
make sure radio is on and you press and hold sel (select) button when you see demo release the select button(you might see other option if you have access the menu options). then press the forward button until you see clock h (hour). to adjust turn volume knob. then press the fast forward button again to get clock m (minute) and use volume knob again to adjust minutes. once you are done make sure to press select again to save the time.
Press and
hold SEL until menu appears Using the
scan button (FWD/REV), select Clock H Using the
volume knob, set the value Using the
scan button (FWD/REV), select Clock M Using the
volume knob, set the value Press SEL to save and exit
×