Blank screen on unit nixon - Nixon Watches

It appears that the time display should always be visible. I was unable to find an owners manual on the Re-Run and a lot of people ask how do you even change the time on them. If there's a power saving or alternate display function in the owners manual, it will explain why the face goes blank.

click link below for the manual, Be passant it takes a while to download..
http://demandware.edgesuite.net/aayf_prd/on/demandware.static/-/Sites-masterCatalog_Nixon/default/dwe2d7f3fa/manuals/nixon-unit-dive.pdf

here is the manual
http://www.nixon.com/uk/en/manuals/nixon-unit.pdf

click this link for instructions
http://uk.nixon.com/manuals/nixon-unit.pdf

For the actual time press the "B" button once, the top screen should say "AL". Now Press the "D" button until the alarm/chime goes away.

replace battery

Hey, this just happened to my nixon watch (I have the nixon housing - same setup as the lowdown) and what you have to do is simply hold in the light display button for about 3 seconds and the display won't disappear after the light times out.

hope this helps :)

Make, model, all numbers, please.

It is so simple. I struggled with this forever then called customer service. To turn off the hourly chime just press the bottom right (wave/reset) button while in the normal time/tide screen. You do not need to go through all of the modes. Just one button press from the home screen. When you see the target icon disappear you have done it.

hello... my nixon dont work... the screen went completely black and does not work any buttons....

I can do??
sanks Daniel