My 32 inch element tv when i push the power button its red then turns blue but no picture

At this stage, try replacing ps Caps. Old elements had cap problems in ps area.

Hello,
the error light sequence that you are seeing is indicating a "backlight error". Most likely you have a bad inverter board -the board that powers up the back-lights behind the display panel. They might be available via ebay if you are a DIYer, or you need to call for sony service.
Good Luck!
Rich Lilja

power supply issue most likely bad capacitors you can get replacement power supply boards or repair kits from www.tvrepairworld.com

Main board. :)
Good luck

Hi lauryic, did you solve your problem? I have the same problem!

-Al

The power supply board has been defected. Replace it with a new one.

Sounds like you need a new main board the light in the front comes on when you push the power button right?

Send the set back for service.

The power supply most likely failed, or another circuit board has failed and the set is in the protect mode.

I would consider to see if the dealer would exchange the set for a well known quality brand name set and pay the difference.


Jerry G.

I have the sames t.v you have to go in the back flip the power cord switch...then reboot the t.v.