Cant calibrate screen after reset. keeps going on and on and want calibrate
Put a blank file called welcome.not (make using notepad) onto the removable storage card this will bypass the startup screen and mean it does not jam into this look on startup
down load a file phm registry edit... (search on internet) put the cab onto the phone... in stall.. and run
set the sensitivity on this to 20, you can then calibrate the screen... you can try stepping it to 18 16 14 and 10..
this will cure the problem
Keep doing, sometimes it takes a while 5-10 times ( but rarelly) after hard reset.
2,790 views
Usually answered in minutes!
×