How do i fix my Kodak easy share DX6490 lcd evf screen? It is grayish black & has lines across it

lcd screen failure --circuit failure need to have diagnosed to see if worth repair can be fixed /replaced

dear sir,
the problem is usually caused by virus and sometimes it might be software failure also, which causes some of the menu not to function,the only solution is to flash ur cam software from the nearest kodak service centre..

thank you...take care

The problem is with the software in the camera! So take your camera to the nearby service center and do a format of your camera! That will fix your problem. Also check whether there is any problem in ur LCD screen!

if you use electrical switch cleaner it wont hurt the camera and it has a lube in it as well much like an oil but its not oil its an electrical oil,,,this will work on any switch or fuse box or volume control that crackles when moved its handy stuff to have around

Know no solution, just, that is, what my camera did when it fell, the zoom lence was zoomed out, now it won't retract. Must have a crack also like yours. I took the back off and tried to see if any cables were loose, none were so I know it's in the front area of the camera. The zoom probably. My LCD screen doesn't come on either. But the camera it turns on and lights up the selection icon that I have it on. Did you get yours fixed? Sorry to post on the solution when not a solution. But, I didn't see a reply button, to type a regular reply.I did call the Kodak company and they said to buy another camera would be cheaper than getting mine sent to them to be fixed.

I think you must have pressed the EVF/LCD button which changes the review area to inside the tiny view finder.. the EVF/LCD button is found on the back of the camera at the top left hand corner.. it is a little silver button. Hope that helps.. :)

press the EVF/LCD button in top left corner of camera

the ccd has went bad must be replaced . it will not focus with a bad ccd .

Sirs I have a Kodak easy share v1003 showing the screen completely white. How can I replace it... seems that I already find the spare part in e-bay. Can I do this replacement by mayself?

most likely a broken / faulty screen. may be the screen ribon cable but unlikely
cheapest option is to get a replacement from a broken camera (ebay or similar) and swap it out yourself.

there are a couple of "tricks" do getting this camera open drop me a line if you decide to proceed...

best of luck