How to solve HP LaserJet m1136 MFP - Restoring factory default settings

Hello,
P{lease visit the following link on the HP website for suggestions on how to fix this issue.
error E3 on my HP laserjet M1132 MFP printer

Good Luck!
Rich Lilja

HP M1136 printers doesn't have E series errors, pl chk

The paper is jam... make sure door is fully closed...

set line and dot pixel production vortex model mode and just scan through wichever way is the oopposite ov the way the product is desired t come out
C:cd:root:owner:<production_manager>:\'c:desktop.run:/line jet axis(x,y,z).interval<subset(x2,y2,z3)>=756.99/5
cd:c:
run paint(jet_axis).internal kernel
shell
//////fun huh
i thinks thats enoght help try that
see i dont know if that was dos but the computer loves it works anyway awesome replicator your welcome! hehehehehhehheheh
peace out
[email protected]
ttfn




.

ERROR E3 IN PRINTER DISPLAY

thisis the farmetter problem

I have face a problem in laserjet m1136 i.e. show a e8 error .how can i free it or remove it..

If nothing else works, you may have to manually calibrate the dials inside the mirror box. This video link will show you how. http://youtu.be/R1DIko0a1MA
This may be necessary if the printer got bumped really hard.

? Restore defaults-used to reset all customer-accessible menu settings back to the factory default
settings (except language) via the control panel or software
NOTE: This service menu item does not reset factory-settable settings, including formatter
number, page counts, factory paper settings, language, and so on.
NOTE: Before restoring defaults, print a menu structure report and a configuration page. Use the
information on these pages to reset customer-specific settings.
CAUTION: All HP Jetdirect settings are also reset. Be sure to print a configuration page before
restoring defaults. Make note of the IP address that is listed on the Jetdirect configuration page. You might need to restore the IP address after performing a cold reset.
Restore the factory-set defaults on the (HP Color LaserJet CP1510 Series Printer

1. Press OK to open the menus.
2. Use the Left arrow or the Right arrow button to select Service, and then press OK (Select).
3. Use the Left arrow or the Right arrow button to select Restore defaults, and then press OK.
The product automatically restarts.

Restoring the factory-set defaults
Restoring the factory-set defaults returns all of the settings to the factory defaults.
To restore the factory-set defaults
1 (LEFT ARROW) or the (RIGHT ARROW) button to select Service, and then press
Use the
(SELECT).
2 (LEFT ARROW) or the (RIGHT ARROW) button to select Restore defaults, and then
Use the
press (SELECT).
The device automatically restarts.

Then you need to change the default settings back to what they were.