Question about Stihl Saws

What is the magneto gap stihl 400 concrete saw

2 Related Answers

Brad

425 Answers

SOURCE: stihl madel ts420 how to change air filter

There are 4 torx screws on the black back cover. Here is the owners manual. It is explained on page 33.

Stihl TS420 owners manual

Posted on Aug 25, 2012

Andrew White

2239 Answers

SOURCE: How do I gap ignition module on a TS350 Stihl concrete saw?

I thought the unit was under the flywheel, in this case there is no gap to set it just screws to the crankcase and you re fit the flywheel.

Posted on Sep 21, 2012

Add Your Answer

Upload an image from your computer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

Why TS 400 Cut Off SAW- runs but has no power- what is wrong?

first the H screw adjustment can be have been wrong (for a while? if it sounds maybe also too smooth turn it some counterclockwise until you hear sometimes a little bit so far that you can hearing the 4 stroke sound to come then its get enough fuel and the L screw must a little bit adjust so that the machine responds as fast as can to the throttle but if there was no adjustments made before this problem by somebody and it was running with a screaming sound at high revs then you have only to look at the piston by disassemble the mufler if there are grooves to see and there is too little compression its gameover with the cilinder and piston .

Apr 30, 2014 | Stihl Concrete Cutoff Saw Flywheel Magneto...

Stihl ts 400

What's your question?

Dec 09, 2013 | Stihl Concrete Cutoff Chop Saw Clutch...

Parts ignition coil wire stihl ts 400

http://www.mediafire.com/download/dg8eh2wsgyovxpl

Jan 28, 2013 | Stihl Concrete Cutoff Chop Saw Clutch...

How do I gap ignition module on a TS350 Stihl concrete saw?

I thought the unit was under the flywheel, in this case there is no gap to set it just screws to the crankcase and you re fit the flywheel.

Sep 18, 2012 | Stihl Chainsaw Cutoff Saw Flywheel 08 S...

Stihl Demo saw 400 pulls with no compression

From [email protected] Hi kaqibso these saws are equipt with a decompression switch.It is located on the right side of the unit and has a red cap on it, pull out on it. Best of Luck......

May 30, 2011 | Stihl Concrete Cutoff Chop Saw Clutch...

I have a stihl st400 disc cutter & I think the pull start needs cleaning, any advice?

compressed air works well. you really need a gun with a long skinny nozzle. for example

Jan 26, 2011 | Stihl Concrete Cutoff Chop Saw Clutch...

What is the gap between the magneto pick up and the rotar

With a USA feeler gauge set .008

Nov 13, 2010 | Stihl Concrete Cutoff Saw Flywheel Magneto...

Need to know belt size fo the stihl ts400 concrete cutoff saw

You should go to a Stihl dealer and ask for the belt for a TS 400 Cut Off Saw. The belt is ribbed, you should only put on a Stihl part to replace the belt and make sure the belt is under the correct tension. When you go to the Stihl dealer you can ask them to show you how to make sure the belt is under the correct amount of tension.

Aug 31, 2010 | Stihl Ts400 Cut Off Saw Carb Carburetor...

I have a TS 400 cut off saw. won't start. Can not get a spark. Changed the plug and nothing. Tried everything I know, except for changing the magneto. Any solutions

try cleaning flywheel and check coil

Jul 26, 2010 | Stihl Concrete Cutoff Saw Flywheel Magneto...

Trying to start a stihl ts 400 disc cutter i pulled the string over and over and nothing .it has oil petrol n everything what can it be?

Try cleaning the plug and spray some starting fluid in the carb.Hope this helps and Thank You for asking!!!

Jul 19, 2010 | Stihl Concrete Cutoff Chop Saw Clutch...

Not finding what you are looking for?

View Most Popular

Saws

Related Question

Why TS 400 Cut Off SAW- runs but has no power- what is wrong?

Stihl Concrete Cutoff Saw Flywheel Magneto Ts 400

Open Questions:

stihl 051 av cylindrical crank bearing part number

Jan 17, 2019 | Stihl Saws

I have a Stihl TS 700 concrete saw. It start an runs very good,but sometimes at highspeed it suddenly stops. Then I just can start it again without any problems and it runs good again. I have replaced airfilter,fuelfilter,sparkplug. Do someone have an idea what the problem can be.

May 08, 2018 | Stihl Saws

stihl 026 chain saw I need to replace the Vibration Dampeners they are broke ,and the tools to take it apart. the saw won't cut like it should it pulls away from the wood.the dampers are broke.

Aug 30, 2017 | Stihl Saws

I have a stihl cut off saw inside the crankcase it has the numbers 911080210700 it has i5 on the casing, which model is this?

May 27, 2017 | Stihl Saws

Related Topics:

393 people viewed this question

Ask a Question

Usually answered in minutes!

Top Stihl Saws Experts

Cindy Wells

Level 3 Expert

6224 Answers

Pieter Vleeshouwers

Level 3 Expert

2027 Answers

Marvin

Level 3 Expert

85239 Answers

Are you a Stihl Saw Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

TS400_Manual.pdf. user-manual-Ts 410...

Stihl Ts 410 420 ...

Have a manual for Stihl Saws? Or just drag it here!

Loading...