No system manual for KX 57630 ? Any offers

You have most likely inadvertently changed it to voicemail only. That happens frequently with my phone (hate it!). Had to contact the vendor to find out how to correct it by inputting a special code.

..unfortunatelly KX-T7630 is just digital terminal compatible with several models of PBX-s.. it is not possible to answer your question

Mirro

Apparently you're subscribed to a voicemail service offered by your telephone company. Please contact them for instructions on accessing their voicemail system.

The KX-T7630 is a proprietary digital phone that will only work on panasonic phone systems. You need an analog phone if you are going to connect it directly to an outside telephone line.

A 7630 is a digital phone that connects to a TDA/TDE or NCP Panasonic phone system. There are 4 analog ports in a TDA-50 or lower phone system, so you could install an answering machine on the first 4 ports of a TDA by default. If you have a TDx-100 or higher, you have to have cards that contain analog ports.

However, you could always wire the answering machine on a specific line.

Carl

You don't "lose" the manual, it comes on a CD. The Panasonic system probably has a TVA voice mail system and it requires you to change the Auto Attendant greeting from the message manager's mailbox. If you don't have the passwords for mailbox 998 and 999, you need to contact someone who has them and a layout of the system.

Your Panasonic technician can guide you through the process.

Carl

Here is the User Guide for your KX-T7630, which can be found at IdacomUSA. We provide User Guides and System Manuals for every system and phone that we repair/refurbish.

KX-T7630 User Guide

I can get you to the right place, maybe. You are better off calling the installer who set this up to see what method he used.

http://www.public.carl.airpost.net/TVA/210_TVA_08-01.pdf

Assuming you have a TDA/TVA system, pages 45-50 describe how it was probably installed. WIth personal custom service, it is the easiest one to make changes on. We usually set it up as an ICD group, which gives everyone 3 digit access from everywhere, but you have to have access to the system programming to change numbers.

Carl

So the real answer is: Do you people buy these phones and forget to attend the training class, or does your dealer expect you to call evertime something happens?

The time display on a 76xx phone comes from the phone system. It is adjusted via Caller ID, or via system programming.

Carl

Of course it's possible. Maybe the PROG softkey is a start. That an a manual.....

Carl