How do i charge my PBT3014 bluetooth speaker - Audio Players & Recorders

See if we can get it working:

Charging Issue:
If the green light is blinking, it might be indicating that the battery is low and needs charging. Connect your speaker to a charger and let it charge for at least 3 hours. The light should turn green when fully charged.
Make sure you're using the correct charging cable and power source.

Auxiliary Mode:
A solid green light typically means the speaker is in AUX mode. This allows you to connect a non-Bluetooth device (like a laptop or MP3 player) to the speaker through the AUX port.
To switch back to Bluetooth mode, press the MODE button (usually represented by three overlapping circles). This should turn the light blue, indicating that the speaker is ready to pair with your Bluetooth device.

Check Connections:
Ensure that there are no loose connections or faulty cables. If you're using an auxiliary cable, make sure it's securely plugged into both the speaker and your audio source.
If you're using Bluetooth, try pairing the speaker with your device again.

Reset the Speaker:
Sometimes a simple reset can resolve issues. Turn off the speaker, disconnect it from any power source, and then turn it back on.

Volume and Sound Settings:
Adjust the volume on both your speaker and the connected device. Make sure the volume isn't too low or too high.
Check if the sound is muted or if any equalizer settings need adjustment.

Firmware Update:
Visit the manufacturer's website or check the user manual for any available firmware updates. Updating the speaker's firmware might address compatibility issues.

If none of these steps resolve the issue, consider reaching out to iCandy customer support for further assistance.

The wiring diagram is not available anywhere. Contact the company at the helpline number here

https://fccid.io/2ACN6PBT3014/User-Manual/User-Manual-2631912

https://www.google.com/search?q=Polaroid+PBT3014+wiring+diagram

..

Try doing default factory settings.
Step 1. Press the "Power" button located on the top center part of your JBL Charge 4 Bluetooth speaker. The speaker will be powered on when the LED backlight under the Power button is lit.
Step 2. Hold down the "Bluetooth" and "Volume Up" buttons at the same time for roughly three seconds. The Volume Up button looks like a plus sign. Additionally, it's important to hold down the "Bluetooth" button in the center of the device next to the Power button, as it's easier to hold down. After three seconds, the LED ring around the Power and Bluetooth buttons will briefly light up before the JBL Charge 4 powers down.
Step 3. Press the "Power" button again to turn the JBL Charge 4 Bluetooth speaker back on. The Charge 4 will instantly turn on in Discovery mode, with the Bluetooth LED blinking on and off, and the speaker making a pinging sound. This confirms that you've successfully reset your JBL Charge 4 to its default factory settings. You'll need to pair or re-pair any devices you want to play audio through the JBL Charge 4 speakers with the device.

unpair jbl speaker in windows 10
then put jbl speaker into pairing mode
then on windows 10 pair speaker in bluetooth settings
then
test speaker to see / hear if it now works

Go to any electronic spare part selling shop to buy it.

Problem connecting Windows 8.1 pc to JBL Charge bluetooth speaker ...

answers.microsoft.com/.../windows/.../windows8...connecting-windows...

When I try to connect the pc through Bluetooth to the above wireless speaker ... 2) What is the model of the JBL Charge Bluetooth speaker? ..... I am already able to play music from my iPhone 5 on this speaker via Bluetooth with no problems.

Cannot connect JBL Charge Bluetooth - Networking, Internet ...

en.community.dell.com/support.../network...wireless/f/.../t/19525571

Dell
Sep 22, 2013 - 16 posts - ‎11 authors
23 Replies; 16 Subscribers; Postedover 2 years ago ... I'm trying to connect my JBL Charge Speaker bluetooth with my Dell Studio 15 laptop to listen .... I am having the same problem, did you find a fix for this? ... not support audio output, then you need to add a Bluetooth adapter which includes a CD driver.

JBL Charge 2 ' Portable Bluetooth Speaker with USB Charger

www.jbl.com > Wireless > Portable Bluetooth Speakers

JBL
Rating: 4.3 - ‎110 reviews
Most popular JBL Charge 2 wireless portable speaker can charge any devices via USB... You can easily connect Charge 2 to any Bluetooth-enabled device by giving the portable's ..... Charge with proper charger or a USB port form computer.

Have a look at these videos, maybe you'll get some tip:


Tmvel Aquamasti Outdoor Waterproof Bluetooth Speaker Review

Tmvel Aquamasti Rugged Wireless Bluetooth 4 0 Shockproof Waterproof...

Aquamasti Rugged Bluetooth Waterproof Speaker

Review Tmvel Aquamasti Rugged Wireless Bluetooth 4 0 Shockproof Waterproof...


No luck? Contact

http://www.tmvel.com/

http://www.tmvel.com/aboutus.asp

Or send them an email?

[email protected]

This speaker doesn't include charging capability.