When plugged in the red standby light comes on, when powered on the standby light flashes a series of times the the screen lights with line streaks for a couple seconds then sharply goes to black.There is no sound, no pic, no backlight, or image through the flashlight test. any suggestions? Since original question I've turned the unit on and checked for back light that deas appear for the few seconds it takes to go blank. The stand by light when switched on blinks 7 times then a very short blink followed by 2 more regular blinks. befor screen with lines then blank
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Sony has provided a "self-diagnosis function"
with your TV, that in the case of abnormalities or problems the LED or
red blinking light on the Timer/Standby indicator flashes a number of
times to indicate the issue. when there is trouble with your
Sony Television set -- it indicates the issue in either the diagnostic
mode, or even more commonly by flashing a series of LED blinks or
flashes on the front of your television. Each set or frequency of the
blinks indicates a very specific problem with the television itself. Sorry but unless you may be able to repair the television set yourself , please call a local repair shop
to the have a repairman sent out,, Take care and please Remember to rate/vote for us to continue for Helping out the Community :)