M7094 Warm Boot Error

Hi Gregor Rogowski,
Here is the link to the files for all of the MC9xxx series
http://www.wavelink.com/Zebra-MC9000-All-Downloads/

Here you can find links to both clean boot files for the WM5.0 and WM6.1 OS for the MC9090. If you need the full WM5.0 OS you can download it here. For upgrades to WM6.1 from WM5.0 fill out this form and BCTP will help you out.

If its not booting up correctly you can either clean boot the device or reflash the firmware. Note this will return trh device to its default state and loose any information stored on the device.

Clean Booting the CN50

If the CN50 seems to be locked up, try warm booting and then cold booting the computer. If neither method works, use a clean boot to get the computer up and running for further troubleshooting. When you clean boot, the CN50 only loads files and applications that are absolutely required by the operating system. A clean boot returns the CN50 to an "out of the box" or factory default state, so that you can run diagnostic tests to troubleshoot the normal boot processes:

To clean boot the computer using the mobile computer:

1 Remove the battery pack from the back of the CN50.

2 Reinsert the battery pack and press the Power button.

3 When the CN50 starts the boot process, simultaneously press <and > until the IPL Boot Configuration Menu appears on the screen.

4 Press 2 to select Force Clean Boot and then press 0 to select

Continue with Boot.

The CN50 executes the clean boot. This process takes a few minutes

The clean boot process erases the CN50 memory, including all applications and data files in the object store. To preserve applications through a clean boot, store them in the Flash File Store.

If you need any more help then please do not hesitate to contact us:-

[email protected] or TEL +44(0)1202 620955

http://www.biastechnology.com/

What you need is bootable DVD/CD for installing or repairing Windows 7 to get missing 'bootmgr' or repair corrupted bootmgr...If there are files corrupt on your CD, you can get new one from shop you have purchased..Maybe just need to clean up your DVD/CD, so your DVD drives can read properly the files installation..

Resetting the MC75

There are two reset functions, warm boot and cold boot. A warm boot restarts the MC75 by closing all running

programs. A cold boot also restarts the MC75, and also resets the clock. Data saved in flash memory or a memory

card is not lost.

If the MC75 is not functioning properly, perform a warm boot first. If the MC75 still does not respond, perform a cold

boot.

Performing a Warm Boot

Hold down the Power button for approximately five seconds. As soon as the MC75 starts to boot release the

Power button.

Performing a Cold Boot
To perform a cold boot simultaneously press the Power button and the 1 and 9 keys.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response

Thanks, Joe



I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Windows 2000 users If your computer is using Microsoft Windows 2000 and you are encountering the NTLDR error. Create the below boot.ini file on the floppy diskette drive.
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)WINNT
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)WINNT="Microsoft Windows 2000 Professional" /fastdetect
Copy the NTLDR and NTDETECT.COM files from another computer using the same operating system. Both of these files are located in the rootdirectory of the primary hard disk drive. For example, C:NTLDR andC:NTDETECT.COM should be the locations of these files on manycomputers.

• Please keep in mind thatthese files are hidden system files, if you need additional help withviewing hidden files in Windows please see document CH000516.
  

Oncethese files have been copied to a floppy diskette reboot the computerand copy the NTLDR and NTDETECT.COM files to the root directory of theprimary hard disk drive. Below is an example of what commonly should beperformed from the A:> drive.
copy ntldr c:
copy ntdetect.com c:
After the above two files have been copied, remove the floppy diskette and reboot the computer.

download the cleanboot files here. upzip the 70XXcleanboot folder. copy the 4 files to an SD card. put the card in the device and cleanboot it (powerbutton + 1 + 9, then hold yellow scanner button).

It will boot

Does it give you a command prompt,example c:/?If so type chkdsc and this will scan the hardrive for boot errors.Let me know.